OTTO Cleanprimer 1101 bonding cleaner for metal and plastic
€13.95
- Cleans and improves adhesion in one single working step
- No flash-off time: apply the sealant straight after coating
- For coated and uncoated metals and for plastics such as PVC
- Economical in use: approx. 30–50 g/m² depending on the substrate
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
OTTO Cleanprimer 1101 is an adhesion cleaner based on a solvent-based cleaner with adhesion promoter for coated and uncoated metallic materials and various plastics such as PVC. It cleans the bonding surfaces and improves the adhesion of OTTO sealants and adhesives in one operation. The 100 ml aluminium bottle is enough for individual joints and minor repairs.
Benefits at a glance
- Two steps in one: cleans the bonding surface and at the same time improves the adhesion of the sealant or adhesive.
- No waiting time: no flash-off time required, the sealant can be applied directly afterwards.
- High yield: consumption approx. 30 to 50 g/m², depending on the absorbency of the substrate.
- Toluene-free: formulated without toluene according to the technical data sheet.
- System-tested: Compatibility with OTTO sealants and adhesives tested and approved by OTTO application technology.
Areas of application
- Uncoated metallic materials
- Coated metals
- PVC and other plastics
- Joint flanks before applying OTTO sealants
Limits & notes
The Cleanprimer is intended for metals and plastics. For porous, mineral substrates such as concrete or plaster there are separate OTTO mineral primers. For combinations other than with OTTO sealants and adhesives, OTTO recommends preliminary tests. Do not apply the primer beyond the joint edges and bonding surfaces, otherwise soiling or visual changes are possible.
Hazard statements: Danger. H225 Highly flammable liquid and vapour. H315 Causes skin irritation. H318 Causes serious eye damage. H336 May cause drowsiness or dizziness. H304 May be fatal if swallowed and enters airways. H411 Toxic to aquatic life with long lasting effects. Safety data sheet available from the manufacturer.
Application & tips
Free the bonding surfaces of release agents, grease, oil, dust, water and old adhesives or sealants; clean non-porous substrates with OTTO Cleaner T and a clean, lint-free cloth, clean porous substrates of loose particles mechanically, for example with a steel brush or grinding disc. Apply the Cleanprimer with a clean rag and sufficient pressure so that it cleans well. A drying time is not required; further processing can also take place several hours later, provided no dust gets onto the surface. Solvent-containing, flammable: only with good ventilation, away from ignition sources; wear safety goggles and solvent-resistant gloves, according to the safety data sheet made of butyl rubber with a thickness of more than 0.4 mm. Because of the many influences on site, a trial application is always necessary. The use-by date is on the container, storage stability is 12 months at 23 °C.
Frequently asked questions
Does the Cleanprimer have to flash off?
No. OTTO gives no flash-off time, the sealant can follow directly.
Is the Cleanprimer applied with a brush?
No. It is applied with a clean rag and sufficient pressure so that cleaning and adhesion improvement act at the same time.
Is the Cleanprimer suitable for concrete or plaster?
No, it is intended for metals and plastics. For absorbent, mineral substrates OTTO offers its own mineral primers.
Technical data
| Base: | Solvent-based |
|---|---|
| Content: | 100 ml |
| Version | |
|---|---|
| Pack size: | 100 ml aluminium bottle |
| Technical data | |
| Density at 23 °C: | approx. 0,7 g/cm³ |
| Flash point: | 2 °C |
| Dangerous goods: | UN 1993, class 3, limited quantity (LQ) up to 1 l |
| Application | |
| Flash-off time at 23 °C / 50 % RH: | none |
| Consumption: | approx. 30–50 g/m² depending on the absorbency of the substrate |
| Application: | clean cloth with sufficient pressure |
| Use | |
| Substrates: | coated and uncoated metals, plastics such as PVC |
| System partners: | OTTO sealants and adhesives |
| What's included | |
| Supplied as: | 100 ml, 250 ml or 1000 ml aluminium bottle, 5 l metal canister |
| Storage stability: | 12 months at 23 °C / 50 % RH |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project
These products go with it
Customers also bought
Content: 0,25 Litre (€15.44 / 1 Litre)
Content: 0,3 Litre (€29.83 / 1 Litre)
Content: 0,5 Litre (€17.90 / 1 Litre)
Content: 100 Metre (€0.15 / 1 Metre)
Content: 0,31 Litre (€28.87 / 1 Litre)