Skip to main content Skip to search Skip to main navigation

Ottoseal A710 white 310 ml cartridge

Description

Ottoseal A710 special acrylic sealant for RAL installation INTERIOR. Ottoseal A 710 has a high practical movement capability and has a low water vapour permeability and therefore Ottoseal A710 RAL Installation INTERIOR is perfectly suited to a permanent airtight interior seal. Ottoseal A710 RAL Installation INTERIOR is used in a system with the OTTO sealants OTTOSEAL P 720 / OTTOSEAL S 730 (exterior sealing).

  • Acrylate sealant for RAL installation INTERIOR 
  • Low water vapour permeability
  • For permanent airtight sealing
  • High practical movement capability
  • Outstanding workability
  • Very good paint compatibility according to DIN 52452

Areas of application:

  • For RAL installation INTERIOR
  • For the permanent airtight interior sealing of connection joints between window and building structure.
  • Can be used in a system with the OTTO sealants OTTOSEAL P 720 / OTTOSEAL S 730 (exterior sealing)

Pre-treatment:

The bonding surfaces must be clean, free of dust and grease and sound. The bonding surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesives/sealants and other substances that impair adhesion, must be removed. Cleaning non-porous substrates: clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous substrates: clean surfaces of loose particles mechanically, e.g. with a steel brush or a grinding disc. Absorbent mineral bonding surfaces should be dampened with water to improve adhesion. The following are also available to improve adhesion: on absorbent substrates - mixture of acrylic sealant/water 1:2 - on absorbent and non-absorbent substrates: primer

Application notes:

Apply the sealant evenly with a manual caulking gun, compressed-air gun or cordless gun and press the surface down with a dampened tool before a skin begins to form. Remove contamination with water while it is fresh. Because of the many possible influences during processing and application, the applicator must always carry out a trial application. The specific use-by date can be found printed on the container and must be observed. We recommend storing the adhesives / sealants in the unopened original containers dry (< 60 % RH) in a temperature range of + 15° C to + 25° C. If the products are stored and/or transported for longer periods (several weeks) at higher temperature/humidity, a reduction in shelf life or a change in material properties cannot be ruled out.

Standards and tests:

  • Component test “Air permeability and driving-rain tightness of a sealing system between window and building structure after simulated short-term loads” (ift Rosenheim)
  • “Recommended for healthy living” by the German Committee for Residential Medicine and Building Hygiene
  • Suitable for applications in accordance with IVD leaflet no. 9

Supplied as:

310ml PE cartridge (20 cartridges per carton)

Colour:

white

Technical data

Material: Polyacrylate
Technical data
Product group: Acrylic sealant
Standards
Standard: DIN 52452
Use
Merchandise group: Sealants
What's included
Supplied as: 310 ml PE cartridge

Data sheets

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany

Electronic address info@otto-chemie.de

All products by OTTO Chemie

Information as of: 2026-09-17

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


For your project

These products go with it

Project: Seal windows and doors to RAL guidelines

Execute the connection joint in three layers: airtight inside (acrylic A710 or interior tape), insulated in the middle (assembly foam or multifunctional tape), driving-rain-tight and vapour-permeable outside (S730 or exterior membrane). Inside must always be tighter than outside.

  1. Prepare the surface

  2. Apply

    • Part of the system Insulates the middle layer; can only be applied with a foam gun
      €11.95 €15.93 / 1 Litre
    • Alternative One tape for all three layers – then without A710 and S730
      €23.29 €2.91 / 1 Metre
    • Alternative One tape for all three layers – then without A710 and S730. Choose the tape dimension according to window installation depth and joint width
      €23.99 €6.00 / 1 Metre
    • Alternative Narrow version (joint 4–30 mm) only for the lower connection – instead of the wide tape, not in addition. Choose the dimension according to the measured joint width
      €13.49 €3.37 / 1 Metre
  3. Seal & join

    • Part of the system Often bought together Use on the outside (weather side) only
      €10.79 €34.81 / 1 Litre
    • Alternative Alternative to S730/membrane for the outer layer; choose the tape size according to joint width. Inside, continue with A710 or interior tape – K600 BG1 only seals outside
      €6.09 €0.47 / 1 Metre
    • Alternative Membrane route outside, instead of S730
      €22.95 €0.38 / 1 Metre
  4. Tools & accessories

5 items selected

Customers also bought

Skip product gallery
Ottoseal S730 for RAL installation, exterior white 310ml
Colour: white
Regular price: €10.79

Content: 0,31 Litre (€34.81 / 1 Litre)

Available, delivery time: 1-3 days

OTTO Primer 1215 mineral primer bonding primer for absorbent substrates 100 ml
Pack size: 100 ml aluminium bottle
Regular price: €14.29

Content: 0,1 Litre (€142.90 / 1 Litre)

Available, delivery time: 1-3 days

PE backer rod joint filler profile B2 water-repellent – 6 mm × 100 m
Pack size: 6 mm ⌀ x 100 m length
Regular price: €14.79

Content: 100 Metre (€0.15 / 1 Metre)

Available, delivery time: 1-3 days

Ottoseal A215 textured acrylic white 310ml
Colour: white
Regular price: €6.79

Content: 0,31 Litre (€21.90 / 1 Litre)

Available, delivery time: 1-3 days