Ottocoll M 560 metal heavy-duty adhesive grey 310ml
€12.49
- Does not stain natural stone, even on pale marble
- Free of silicone and free of isocyanates
- Bonds to a very broad range of substrates
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Product information:
- Compatible with natural stone
- Causes no greasing on natural stone
- Silicone-free
- Isocyanate-free
- Very wide range of adhesion
- Very good adhesion even on difficult substrates, e.g. on damp substrates, plastics
- Very strong initial tack
- No fixing required
- Fast through-curing
- Shorter working time
- Elastic
- Compensates for movement
Areas of application of Metal Power Adhesive:
Generally suitable for:
Aluminium bare / anodised; concrete; concrete block stone; stainless steel; enamel; tiles / ceramics; GRP, gypsum / plasterboard; glass without UV exposure; rigid foam boards; wood & wood-based materials raw / varnished & stained (solvent- & water-based); HPL boards; clinker / brick; lightweight blocks / aerated concrete; MDF / OSB / chipboard; melamine resin boards; brass; metal powder-coated / painted (test adhesion); natural and artificial stone; cork; copper; plaster; rigid PVC; mirrors (observe application notes); galvanised steel
Pre-treatment:
The bonding surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesives/sealants and other substances that impair adhesion, must be removed. Cleaning non-porous substrates: clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous substrates: clean surfaces of loose particles mechanically, e.g. with a steel brush or a grinding disc. The bonding surfaces must be clean, free of grease, dry and sound.
Application notes:
To achieve optimum adhesion and good mechanical properties, the inclusion of air must be avoided. The time to curing can be shortened by adding moisture and by higher temperatures. When bonding vapour-tight substrates over a large area, the adhesive should be dampened. Because of the many possible influences during processing and application, the applicator must always carry out a trial application. The specific use-by date can be found printed on the container and must be observed. We recommend storing our products in the unopened original containers dry (< 60 % RH) in a temperature range of + 15° C to + 25° C. If the products are stored and/or transported for longer periods (several weeks) at higher temperature/humidity, a reduction in shelf life or a change in material properties cannot be ruled out.
Colour:
beige
Storage:
12 months when stored frost-free, temporary storage down to -10 °C possible, but not longer than 48 hrs.
Supplied as:
310 ml cartridge (20 cartridges per carton)
Technical data
| Version | |
|---|---|
| Colour: | grey |
| Technical data | |
| Product type: | Power adhesive |
| Product group: | Metal adhesive |
| Use | |
| Merchandise group: | Adhesives |
| What's included | |
| Supplied as: | 310 ml cartridge |
| Storage | |
| Storage: | 12 months when stored frost-free |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project