Skip to main content Skip to search Skip to main navigation

Pattex Repair Express Power putty 2K epoxy, 6 × 5 g

Description

The Pattex Power Putty is a two-component epoxy modelling compound. Resin and hardener are mixed by hand; the compound can then be shaped like putty and cures into a solid plastic that can be drilled, sanded and painted over.

Benefits

  • Six individually packed portions of 5 g, opened leftovers do not cure along with the rest
  • Fully cured after 24 hours and mechanically loadable
  • Sandable and paintable, the repair disappears under paint
  • Weather-resistant, also for components outdoors
  • Solvent-free and can be processed without a mixing tool

Areas of application

  • Repairing holes and defects in wood, stone and metal
  • Reshaping broken edges and threads
  • Sealing pipes and leaks
  • Repairs for which a liquid adhesive would run away

Product details

The putty consists of epoxy resin and hardener and is whitish to beige. Six portions of 5 g each, pack weight 48 g. Final strength after about 24 hours.

Cut off the quantity needed and knead it with your fingers until the compound is evenly coloured – this takes about one minute. After that only a few minutes remain for shaping. Wear gloves and roughen the surface beforehand, which clearly improves adhesion.

Technical data

Area of use: Exterior, Interior
Colour: beige
Content: 30 g
Technical data
Contents per pack: 5 g
Product group: 2-component adhesive
Use
Field of use: Outdoors, indoors
Merchandise group: Adhesives

Data sheets

Data sheets and documents

All documents come unchanged from the manufacturer.

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Henkel AG & Co. KGaA
Henkelstraße 67
40589 Düsseldorf
Germany

Electronic address corporate.communications@henkel.com

All products by Pattex

Information as of: 2026-09-17

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


For your project

These products go with it

Project: Bond and repair metal and plastic

Roughen the bonding surfaces, degrease them and prime depending on the material – then the bond also holds on metal and plastic. Join small parts with superglue or 2K epoxy, loaded bonds with contact adhesive or 2K adhesive from the twin cartridge.

  1. Prepare the surface

  2. Finish & care

3 items selected