Soudal Soudafoam X-tra 750 gun foam B2 assembly foam 500 ml
€5.95
- Solvent-free and rot-proof
- Barely expands further once cured
- Insulates sound and heat better than mineral wool
- Dosed precisely via the gun thread
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
The Soudal Soudafoam X-tra 750 Gun B2 is a 1K polyurethane foam for the dosing gun that delivers the foam yield of a 750 ml can from a 500 ml can. It is used for foam-filling, insulating and fixing window and door frames.
Benefits at a glance
- High yield: 500 ml gives approx. 35 litres of foam – like a 750 ml can
- Solvent-free, dimensionally stable, only slight post-expansion after curing
- Precise dosing by gun – clean, economical working
- Excellent adhesion on almost all common building substrates
- Fast skin formation after 6 minutes, cuttable after as little as approx. 15 minutes
Areas of application
- Installing and foam-filling window and door frames as well as window sills
- Foam-filling cavities, wall openings and pipe penetrations
- Thermal and sound insulation, also in refrigerated vehicle and cold room construction
- Fixing and filling in apparatus, metal and electrical installation engineering
Compared with hand-held foam: more precisely dosable, less material loss.
Technical properties & application
MDI polyurethane foam, bulk density approx. 20 kg/m³, when cured temperature-resistant -40 to +90 °C. Thermal conductivity 0.037 W/(m·K), joint sound insulation up to 62 dB, compressive strength approx. 38 kPa. Water-resistant (not waterproof), not UV-resistant – paint over or cover outdoors. Building material class E to EN 13501-1, corresponds to B2 to DIN 4102.
Application: shake the can vigorously before use, screw on the adapter tube, fill joints only to about 1/3, as the foam continues to expand. Application temperature of the can +5 to +30 °C, substrate +5 to +35 °C. Cut off protruding, cured foam with a knife.
Technical data
| Area of use: | Exterior, Interior |
|---|---|
| Colour: | grey |
| Pack size: | 500 ml |
| Version: | B2 |
| Technical data | |
|---|---|
| Product type: | Gun foam |
| Standards | |
| Building material class: | E |
| Standard: | DIN 4102 |
| Use | |
| Field of use: | Indoors, outdoors |
| Merchandise group: | Construction foam & PU foam |
| Application | |
| Tack-free after: | 6 minutes |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Soudal N.V.
Everdongenlaan 18-20
2300 Turnhout
Belgium
Electronic address verkauf@soudal.com
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project