Skip to main content Skip to search Skip to main navigation

Soudal PU Remover foam remover low-odour incl. brush 100 ml

Description

The Soudal PU Remover is a fast-acting special remover for cured polyurethane foam on non-porous surfaces such as plastic, coatings and aluminium – the low-odour gel reliably dissolves PU foam residues.

Your benefits at a glance

  • Highly effective against cured PU foam
  • Low odour for pleasant working
  • Free of aromatic hydrocarbons and chlorinated hydrocarbons (CHCs)
  • Readily biodegradable
  • Economical in use, convenient to apply with a brush

Areas of application

  • Removes PU foam residues on non-porous, non-absorbent substrates
  • Ideal after mounting and building foam work on windows, doors and frames
  • Frees tools and plastic surfaces of foam residues
  • Not for copper, zinc, brass or porous substrates (risk of staining)

Chemical and technical properties

Beige gel based on water-soluble solvents, density approx. 1.54 g/cm³. Contact time 30 minutes up to a maximum of 2 hours. Can be stored unopened at +5 °C to +25 °C for up to 36 months.

Use & tips

First remove the foam mechanically, apply PU Remover generously with a brush and close the can again immediately, as moisture reduces its effectiveness. After the contact time, scrape off the foam with a spatula without adding water and wipe over with a dry cloth. Repeat for stubborn residues; remove the last traces in joints with a damp sponge. Carry out a compatibility test before use, as glossy surfaces may become matt.

Technical data

Colour: beige
Content: 100 ml
Pack size: 100 ml tin with brush and spatula
Technical data
Product group: Foam guns & foam cleaners
Bulk density: 1,54 g/cm³
Use
Merchandise group: Construction foam & PU foam

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Soudal N.V.
Everdongenlaan 18-20
2300 Turnhout
Belgium

Electronic address verkauf@soudal.com

All products by Soudal

Information as of: 2026-09-17

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


For your project

These products go with it

Project: Apply PU foam

Dose gun foam with a foam gun, adapter foam directly via the tube on the can. Flush the gun with cleaner after work and remove fresh foam immediately – cured foam can only be removed mechanically or with foam remover.

  1. Prepare the surface

  2. Tools & accessories

8 items selected