Soudal Silirub PRO N neutral silicone low-stringing transparent 300 ml
€7.29
- Barely strings, so the joint stays clean
- Vapour-permeable, so the joint can breathe
- Compatible with paint and bitumen alike
- Takes frost as readily as heat at the flue pipe
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Soudal Silirub PRO N is a neutral-curing 1K silicone sealant for professionals that reliably seals permanently elastic joints indoors and outdoors. The low-stringing silicone can be applied cleanly and adheres to almost all common building substrates.
Your benefits
- Low-stringing and very easy to work with
- Vapour-permeable for breathable joints
- Wide range of adhesion, paint- and bitumen-compatible
- Solvent-free, non-corrosive and fungicidal
- UV- and weather-stable, temperature-resistant -60 °C to +180 °C
Areas of application
- Connection joints between masonry and window/door frames (Soudal Window System)
- Glass/frame sealing with wood, anodised aluminium and rigid PVC
- Joints in sanitary rooms, kitchens and at sinks
- Sealing in cold rooms and container construction
Chemical and technical properties
Base: polysiloxane, neutral-curing. Density approx. 1.05 g/ml, Shore A hardness 16 ± 5, tensile strength approx. 1.36 N/mm² at over 800 % elongation at break. Skin-forming time approx. 10 min., through-curing approx. 2 mm/24 h. Application temperature +5 °C to +35 °C. Complies with DIN 18545 Part 2, E and ISO 11600-F-25LM.
Application tips
Apply with a manual, compressed-air or cordless gun and smooth before a skin forms. Remove fresh residues with white spirit, cured residues mechanically or with silicone remover. Not suitable for natural stone, PE/PP/PTFE or bituminous substrates. Available as a 300 ml cartridge in transparent, white and grey.
Technical data
| Area of use: | Exterior, Interior |
|---|---|
| Colour: | transparent |
| Content: | 300 ml |
| Material: | Silicone |
| Pack size: | 300 ml cartridge |
| Technical highlights: | Heat-resistant bis 180°C |
| Technical data | |
|---|---|
| Base: | Polysiloxane, neutral-curing |
| Product type: | Neutral silicone |
| Product group: | Construction silicone & window silicone |
| Shore hardness: | Shore A 16 |
| Temperature resistance: | up to 180 °C |
| Standards | |
| Standard: | DIN 18545 |
| Use | |
| Merchandise group: | Sealants |
| Application | |
| Through-curing: | 2 mm/24 h |
| Application temperature: | +5 °C to +35 °C |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Soudal N.V.
Everdongenlaan 18-20
2300 Turnhout
Belgium
Electronic address verkauf@soudal.com
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project