Sika Sikafloor-410 PU sealer transparent silk matt for balcony and terrace
€189.95
- UV-stable and non-yellowing - it protects balcony coatings for good
- Elastic with approx. 300 % elongation at break and good crack bridging
- Slip resistance R9 to R11 to DIN 51130 with Sikafloor anti-slip agent
- Walkable after approx. 8 hours, fully load-bearing after approx. 5 days (+20 °C)
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Version 3kg double pack. The Sika Sikafloor-410 floor sealer (3 kg double pack) is a transparent, elastic and weather-resistant sealer for balconies, access walkways and terraces. It protects scattered colour chips from dirt, is UV-stable and abrasion-resistant and is also suitable for creating a slip-resistant surface.
Your benefits
- Transparent and low-yellowing, UV-stable and weather-resistant
- Elastic and crack-bridging
- Abrasion-resistant and easy to clean
- Simple dosing at the specified mixing ratio
- Slip resistance possible by scattering in quartz sand
Areas of application
- Top sealing of chip-scattered Sikafloor coatings
- Balconies, access walkways and terraces outdoors
- Priming and levelling under Sikafloor systems
- Indoors and outdoors on concrete and cement screed
Technical details and application
Sikafloor-410 is a 2K preparation. The substrate must be clean, load-bearing, dry and free of greases, oils and separating substances. Do not use on ceramic coverings, as trapped moisture can lead to detachment and discolouration. Consumption about 0.15 kg/m²; on floors with full-surface chip scattering, two passes are recommended. For a slip-resistant surface, scatter in 10 to 30 g of quartz sand (0.1 to 0.3 mm) per litre.
Technical data
| Area of use: | Exterior |
|---|---|
| Base: | Solvent-based |
| Gloss level: | Silk matt |
| Material: | Polyurethane (PU) |
| Pack size: | 3 l bucket, 10 l bucket |
| Version | |
|---|---|
| Content: | 3 l |
| Technical data | |
| Appearance: | transparent, silk matt |
| Solids content: | approx. 45 % (by weight), approx. 50 % (by volume) |
| Tensile strength: | approx. 27 N/mm² (DIN 53455) |
| Elongation at break: | approx. 300 % (DIN 53455) |
| Slip resistance: | R9 to R11 to DIN 51130 (with Sikafloor anti-slip agent) |
| Fire behaviour: | Cfl-s1 to DIN EN 13501-1 |
| Field of use: | outdoors only |
| Application | |
| Consumption: | approx. 0.15 kg/m² per working step |
| Application temperature: | +10 to +30 °C (air and substrate) |
| Working time: | approx. 60 min (+20 °C) |
| Load capacity: | rainproof approx. 5 h, walkable approx. 8 h, fully load-bearing approx. 5 days (+20 °C) |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Sika Deutschland CH AG & Co KG
Kornwestheimer Straße 103-107
70439 Stuttgart
Germany
Electronic address info@de.sika.com
Information as of: 2026-09-18
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project
These products go with it
Customers also bought
Content: 6 Kilogram (€41.66 / 1 Kilogram)
Content: 2,5 Kilogram (€39.12 / 1 Kilogram)