Ottoseal S51 plastic floor silicone transparent 310ml
€17.95
- The shades are matched to common floor coverings, so the joint barely shows
- MEKO-free and therefore safe to apply indoors as well
- Classified as not readily flammable, which counts in escape routes and stairwells
- Evens out stresses between covering and wall instead of cracking open
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Ottoseal S51 for sealing on floor coverings such as rubber floors, linoleum floors, PVC floors, vinyl floors. Ottoseal S51 is flame-retardant.
- 1K silicone sealant based on an aminoxime system - MEKO-free
- Very good weather, ageing and UV resistance
- Colour-matched to floor coverings made of PVC, rubber and linoleum
- Flame-retardant
Areas of application:
- Connection joints on rubber floors
- Connection joints on linoleum floors
- Connection joints on PVC floors
- Stress-compensating sealing of identical and different materials such as glass, stainless steel, aluminium and some plastics
Substrates:
The bonding surfaces must be clean, free of grease, dry and sound so that the high-temperature adhesive adheres. The bonding surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants and other substances that impair adhesion, must be removed. Cleaning non-porous substrates: clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous substrates: clean surfaces of loose particles mechanically, e.g. with a wire brush or a grinding disc
When jointing linoleum floor coverings, only wet the smoothing tool with a little smoothing agent or pull off dry. Remove smoothing agent residues from the covering before they dry on, to avoid staining.
Application:
Application method: manual caulking gun, compressed-air gun or cordless gun
Application temperature:
+5°C to +40°C (ambient temperature)
+5ºC to +35ºC (bonding surface temperature)
Standards and tests:
- Tested to EN 15651 - Part 1: F EXT-INT CC 25 LM
- Tested to EN 15651 - Part 4: PW EXT-INT CC 25 LM
- Tested to DIN 4102-B1 – flame-retardant between solid mineral building materials (TU Munich wood research)
- Tested to DIN EN ISO 4589-2:1999 Plastics — Determination of burning behaviour by oxygen index (Bodycote Warringtonfire)
- Tested for cleanroom applications by the Hygiene Institute Gelsenkirchen
- LEED® v3 compliant Credit IEQ 4.1: adhesives and sealants
- DGNB classifications see product page on the OTTO website
- Suitable for applications according to IVD Technical Data Sheet No. 11+31+35
- French VOC emission class A+
Storage:
12 months from the date of production in unopened packaging, stored cool (+5ºC and +25ºC) and dry. Close opened containers tightly and use up quickly.
Colour:
agate grey ,anthracite, aqua ,Bahama beige ,pale brown ,blue-grey ,brown ,brown-red ,brilliant blue ,blackberry ,cream ,cream beige ,cream white ,thistle grey ,doussie, pear ,dark brown ,light oak ,rustic oak ,flash grey ,pine ,cherry ,loam ,lime green ,melon ,orangina ,oxide red ,pastel blue ,pastel yellow ,pastel green ,patina green ,pearl grey ,petrol ,pure white ,saffron yellow ,Sahara ,sandstone grey ,black ,signal white ,stone grey ,pigeon blue ,taupe ,deep-sea blue ,titanium grey ,tomato ,transparent ,violet blue ,white ,cloud grey
Supplied as:
310ml cartridge
Technical data
| Material: | Silicone |
|---|
| Version | |
|---|---|
| Colour: | transparent |
| Technical data | |
| Product group: | Speciality silicone |
| Standards | |
| Standard: | DIN 4102 |
| Use | |
| Merchandise group: | Sealants |
| Application | |
| Application temperature: | +5 °C to +40 °C |
| What's included | |
| Supplied as: | 310 ml cartridge |
| Storage | |
| Storage: | 12 months from the production date in unopened packaging, stored cool (+5ºC and +25ºC) and dry |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project
These products go with it
Customers also bought
Content: 100 Metre (€0.15 / 1 Metre)
Content: 0,3 Litre (€29.83 / 1 Litre)