Düfa Allgrund adhesion primer rust protection metal matt RAL 7001 silver grey 375 ml
€15.39
- Haftgrund, Rostschutz und Vorlack in einer Dose
- Haftet auf Zink, Aluminium, Kupfer, Hart-PVC und Holz
- Rostschützende Pigmente für Eisen und Stahl, innen wie außen
- Ergiebig: 375 ml reichen für rund 3,7 bis 4,7 m² je Anstrich
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Düfa Allgrund in RAL 7001 silver grey is an adhesion primer, rust protection and undercoat based on alkyd resin for metal, wood and rigid PVC indoors and outdoors. Rust-inhibiting pigments protect iron and steel against corrosion, while the Allgrund also promotes adhesion on zinc, aluminium, copper and many paint-compatible plastics. The 375 ml tin has a matt finish, is ready to use and is the right size for touch-up repairs and small components.
Advantages at a glance
- Three functions in one coat: adhesion promoter, rust protection and undercoat save a complete work step.
- Wide substrate range: iron, steel, zinc, aluminium, copper, rigid PVC and wood using the same procedure.
- Economical: approx. 80 to 100 ml/m² per coat, one tin covers around 3.7 to 4.7 m².
- Quick build-up: surface-dry after approximately 1 hour, recoatable after around 8 hours.
- Ready to use: apply undiluted by brush, roller or airless sprayer.
Areas of application
- Corrosion protection on iron and steel, indoors and outdoors
- Adhesion primer on galvanised components, aluminium and copper
- Undercoat beneath solvent-based synthetic resin paints
- Windows, doors, railings, gates and steel door frames
- Rigid PVC and paint-compatible plastics
- Touch-up repairs on previously primed components
Limitations & notes
Do not apply over rust, mill scale or forge scale: remove these layers down to bright metal first, otherwise corrosion will undermine the coating. Zinc requires an ammoniacal wetting-agent wash and at least two coats. Pressure-treated wood should not be coated until approximately six months of weathering. Excessively thick coats may wrinkle. Outdoors, two coats are always required.
Hazard statements: Warning. H226 Flammable liquid and vapour. H412 Harmful to aquatic life with long lasting effects. EUH066 Repeated exposure may cause skin dryness or cracking. Safety data sheet available from the manufacturer.
Application & tips
Prepare the substrate clean, dry, free of grease and dust; sand and degrease sound old coatings, remove unsound ones. Stir well and apply undiluted with a varnish brush, roller or airless sprayer; object and surroundings at least +5 °C, including during drying. Indoors one to two coats are sufficient depending on substrate, outdoors two coats are mandatory. Solvent-based, flammable: use only with good ventilation, away from ignition sources; wear safety goggles and solvent-resistant gloves (nitrile). When spraying indoors also wear respiratory protection with A2 gas filter. Clean tools immediately after use with cellulose thinner or brush cleaner. Store dry, cool and frost-free, seal opened containers tightly.
Technical data
| Area of use: | Exterior, Interior |
|---|---|
| Base: | Solvent-based |
| Colour: | RAL 7001 silver grey, white |
| Content: | 375 ml |
| Gloss level: | Matt |
| Material: | Synthetic resin |
| Pack size: | 375 ml tin |
| Technische Daten | |
|---|---|
| Basis: | Alkydharz, lösemittelhaltig |
| Dichte: | ca. 1,34 bis 1,38 g/cm³, je nach Farbton |
| VOC-Gehalt: | unter 500 g/l (EU-Grenzwert Kat. A/i 500 g/l) |
| Giscode: | BSL40 |
| Verarbeitung | |
| Verbrauch: | ca. 80 bis 100 ml/m² je Beschichtung |
| Auftragsverfahren: | Pinsel, Rolle oder Airless, unverdünnt |
| Verarbeitungstemperatur: | mindestens +5 °C für Objekt und Umgebung |
| Trocknung: | oberflächentrocken ca. 1 h, überstreichbar ca. 8 h (+20 °C, 65 % r. F.) |
| Beschichtungsaufbau: | innen 1 bis 2, außen 2 Beschichtungen |
| Werkzeugreinigung: | Nitro-Universalverdünnung oder Pinselreiniger |
| Lagerung | |
| Lagerung: | trocken, kühl, frostfrei; Anbruchgebinde dicht verschließen |
| Lieferumfang | |
| Lieferform: | 375 ml Dose |
Frequently asked questions
What does Düfa Allgrund adhere to?
Iron, steel, zinc, aluminium, copper, rigid PVC and wood. On zinc, an ammoniacal wetting-agent wash and at least two coats are required.
How much area does 375 ml cover?
At 80 to 100 ml/m², the tin covers around 3.7 to 4.7 m² per coat. Outdoors, two coats are required.
When can I apply the topcoat?
After approx. 8 hours at 20 °C and 65% relative humidity. At lower temperatures or higher humidity, it takes longer.
Do I need to thin Allgrund?
No, it is supplied ready to use, including for airless spraying. Thinning would exceed the EU VOC limit.
Can I paint directly onto rust?
No. Rust, mill scale and scale must be removed down to bright metal, otherwise corrosion will undermine the coating.
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Meffert AG Farbwerke
Sandweg 15
55543 Bad Kreuznach
Germany
Electronic address info@duefa.de
Information as of: 2026-11-02
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project