Skip to main content Skip to search Skip to main navigation

Düfa high-gloss paint coloured varnish 750 ml RAL 7001 silver grey

Description

Colour RAL 7001 silver grey. Düfa high-gloss paint in RAL 7001 silver grey is a brilliantly glossy professional coloured paint based on alkyd resin for decorative and protective coatings on almost all substrates indoors and outdoors. After curing, the paint film forms a particularly hard, resistant and weather-resistant surface.

Benefits

  • High gloss with very good flow and very high covering power
  • Impact-resistant and shock-proof, extremely hard-wearing
  • Solvent-based and aromatics-free, for indoors and outdoors
  • Resistant to common household cleaners
  • Colour RAL 7001 silver grey, mixable with the other shades

Areas of application

  • Windows, doors, fences and furniture made of wood
  • Primed metal parts such as railings, gates and radiator covers
  • Rigid PVC and other paintable plastics after sanding
  • Renovation and colour changes of surfaces that have already been painted

Technical details and application

Binder: alkyd resin. Gloss level high gloss, density about 0.96 to 1.27 g/cm³ depending on the shade. Consumption about 100 ml/m² per coat. Drying time at 20 °C and 65 % relative humidity: surface-dry after about 6 to 8 hours, can be overpainted after about 24 hours. Processing temperature at least +5 °C. Apply undiluted; check the shade before processing.

Processing: the substrate must be clean, free of grease, dry and load-bearing. Remove weathered wood down to sound wood, clean resinous woods with nitro universal thinner; derust and prime metal, sand down old coats. Stir the paint thoroughly and apply in thin coats with a paintbrush or paint roller, observing the drying time between coats. Use material from one batch on contiguous surfaces.

Technical data

Area of use: Exterior, Interior
Base: Solvent-based
Colour: RAL 3000 flame red, RAL 5010 gentian blue, RAL 6005 moss green, RAL 7001 silver grey, RAL 8011 nut brown, RAL 9005 jet black, RAL 9010 pure white
Content: 750 ml
Gloss level: high gloss
Material: Synthetic resin
Pack size: 750 ml tin
Technical data
Density: approx. 0.96–1.16 g/cm³ depending on shade
VOC content: < 300 g/l (limit cat. A/d: 300 g/l)
Flash point: 62 °C
Application
Consumption: approx. 100 ml/m² per coat
Drying time: surface dry after approx. 6–8 h, overpaintable after approx. 24 h (20 °C / 65% RH)
Application temperature: at least +5 °C, site and surroundings
Thinning: ready to use, apply undiluted
Tool cleaning: Cellulose thinner or brush cleaner
Storage: dry, cool, frost-free; close part-used packs tightly
What's included
Supplied as: 750 ml can

Frequently asked questions

Do I need to prime before painting?

Yes. The data sheet specifies a separate primer for each substrate: on wood, düfa Vorstreichfarbe; on iron and steel, düfa Rostschutz Grund or düfa Allgrund.

How much area does 750 ml cover?

Coverage is approx. 100 ml/m² per coat, so around 7.5 m² per coat. At least two coats are needed for adequate protection.

When can I apply the second coat?

At 20 °C and 65% relative humidity, the paint is surface-dry after approx. 6 to 8 hours and can be overpainted after approx. 24 hours.

Is the paint suitable for large interior surfaces?

For these, düfa recommends water-based paints because of odour development. The high-gloss paint is solvent-based and better suited to windows, doors and metal parts.

Does the white paint yellow?

Yellowing can occur with light, transparent and white shades. According to the data sheet, this is typical of the material and not a defect.

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Meffert AG Farbwerke
Sandweg 15
55543 Bad Kreuznach
Germany

Electronic address info@duefa.de

All products by Düfa

Information as of: 2026-11-02

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


For your project

These products go with it

Project: Paint doors, radiators and metal

Sand old paint, remove dust and mask adjacent surfaces; prime raw wood or bare metal first. Apply the paint thinly with a fine paint roller and work edges, profiles and slats with the brush.

  1. Prepare the surface

  2. Tools & accessories

9 items selected