Düfa all-purpose primer rust protection RAL 7001 silver grey 0.75 l
€22.49
- One coat replaces primer, rust protection and undercoat
- Formulated aromatic-free
- Active pigments keep rust away from the steel
- Fills and covers strongly
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Colour RAL 7001 silver grey. The Düfa Allgrund is a universally applicable professional adhesion primer, rust protection and undercoat in one for indoors and outdoors. It reliably protects iron and steel against corrosion and acts as an adhesion promoter on aluminium, zinc, copper and paint-compatible plastics.
Your benefits
- Primer, rust protection and undercoat in one
- Solvent-based and aromatic-free
- Rust-protective thanks to active pigments
- High filling and covering power
- Temperature-resistant up to 120 °C, for indoors and outdoors
Areas of application
- Corrosion protection on iron and steel
- Adhesion promotion on aluminium, zinc and copper
- Paint-compatible plastics
- Professional substrate pre-treatment indoors and outdoors
Technical details and application
The substrate must be clean, free of grease, dry and load-bearing; remove rust and loose particles mechanically. Stir the Allgrund thoroughly before use and apply evenly with a brush, roller or spray device. Allow to dry sufficiently before overpainting. Clean tools with a suitable thinner. Observe the manufacturer's information on consumption and drying.
Technical data
| Area of use: | Exterior, Interior |
|---|---|
| Base: | Solvent-based |
| Colour: | RAL 7001 silver grey, white |
| Content: | 0.75 l |
| Gloss level: | Matt |
| Material: | Synthetic resin |
| Pack size: | 0.75 l tin |
| Technical data | |
|---|---|
| Temperature resistance: | up to 120 °C |
| Use | |
| Merchandise group: | Paints, varnishes & wood preservation |
| What's included | |
| Supplied as: | 0.75 L bucket |
| Product group: | Primer & deep primer |
Frequently asked questions
What does Düfa Allgrund adhere to?
Iron, steel, zinc, aluminium, copper, rigid PVC and wood. On zinc, an ammoniacal wetting-agent wash and at least two coats are required.
How much area does 0.75 litres cover?
At 80 to 100 ml/m², the tin covers around 7.5 to 9 m² per coat. Outdoors, two coats are required.
When can I apply the topcoat?
After approx. 8 hours at 20 °C and 65% relative humidity. At lower temperatures or higher humidity, it takes longer.
Do I need to thin Allgrund?
No, it is supplied ready to use, including for airless spraying. Thinning would exceed the EU VOC limit.
Can I paint directly onto rust?
No. Rust, mill scale and scale must be removed down to bright metal, otherwise corrosion will undermine the coating.
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Meffert AG Farbwerke
Sandweg 15
55543 Bad Kreuznach
Germany
Electronic address info@duefa.de
Information as of: 2026-11-02
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project