Tangit M3000 2K expanding resin for building service entries 150 ml
€19.95
- Fills penetrations by itself
- Works without power and without water
- For house and cable penetrations and for well building
- Applied through the static mixer
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Tangit M3000 is a two-component polyurethane expansion resin for permanent sealing of house and cable penetrations and in well construction. The 150 ml cartridge is applied with a static mixer and fills openings independently – entirely without electricity or water.
Benefits at a glance
- ✅ Self-filling – reliably seals openings
- ✅ Functional strength after 5 minutes, final strength after 30 minutes
- ✅ Dimensionally stable, no shrinking after curing
- ✅ Exact mixing ratio thanks to 2K cartridge with static mixer
- ✅ DVGW-certified (VP601) and tested gas-tight
Areas of application
- 🔧 Single-utility and multi-utility house entries
- 🔧 Repair of leaking pipe and cable penetrations
- 🔧 Waste water and cable wall penetrations
- 🔧 Well construction
- 🔧 Repair from the inside of the building, also on residually damp substrate
Technical properties
Tangit M3000 is based on a 2K polyurethane resin with a foam density of around 200 kg/m³. The pot life is approx. 1 minute (23 °C), application at +5 °C to +30 °C. Cured it can bear permanent loads from −40 °C to +90 °C, briefly up to 650 °C. Unopened cartridges keep for at least 24 months stored cool and frost-free.
Application tips
Substrate and pipes must be clean and free of grease. Remove the cartridge cap, screw on the static mixer – ready for immediate use. Partial removal is possible without residues. In case of pressurised water additionally use the M4082 sealing hose. Consumption depending on diameter is approx. 1–3 cartridges of 150 ml each.
Technical data
| Area of use: | Exterior, Interior |
|---|---|
| Content: | 150 ml |
| Material: | Polyurethane (PU) |
| Technical data | |
|---|---|
| Product type: | Expansion resin |
| Product group: | 2K foam & door frame foam |
| Use | |
| Field of use: | Indoors, outdoors |
| Merchandise group: | Construction foam & PU foam |
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Henkel AG & Co. KGaA
Henkelstraße 67
40589 Düsseldorf
Germany
Electronic address corporate.communications@henkel.com
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project
These products go with it
Customers also bought
Content: 100 Gram (€0.50 / 1 Gram)
