Skip to main content Skip to search Skip to main navigation

Soudal Soudatight WP liquid membrane waterproof for window connections 5 kg

Description

Soudatight WP is a 1-component liquid membrane based on hybrid polymer for the permanent sealing of window connections outdoors, for example on balconies and terraces. When cured, it forms a seamless, elastic, vapour-permeable and waterproof layer that can be painted over or plastered.

Benefits at a glance

  • Airtight and watertight after complete curing
  • Vapour-permeable – moisture can escape
  • Rain-resistant after only approx. 2 hours
  • Permanently elastic, crack-bridging and UV-resistant
  • Solvent- and isocyanate-free, EC1-PLUS certified

Areas of application

  • Floor-level window connections on balconies and terraces
  • Plinth and foundation connections above ground level
  • Reveal areas in insulated precast concrete elements
  • Alternative to bitumen: low odour, quickly rain-resistant

Chemical and technical properties

Base hybrid polymer, density approx. 1.51 g/ml, viscosity approx. 75,000 mPa·s. Skin-forming time approx. 30 min. (23 °C/50 % RH), through-curing approx. 3 hrs/1 mm. Tensile strength ≥ 1.30 N/mm², elongation at break > 500 %, Shore A hardness approx. 29. Temperature resistance -40 °C to +80 °C, application temperature +5 °C to +40 °C. Consumption approx. 2.0 kg/m²/2 mm.

Application tips

Apply undiluted with a flat brush in 2 layers: approx. 1 mm base layer, embed Soudatextile fleece with a 3-5 cm overlap, then 1-2 mm top layer. Keep the substrate sound and free of dust and oil; slightly damp surfaces are not a problem. 5 kg is enough for approx. 2.5 m².

Technical data

Area of use: Exterior, Interior
Colour: grey
Content: 5 kg
Material: Hybrid polymer
Pack size: 5 kg bucket
Technical highlights: Rainproof after 2 hours, UV-resistant
Technical data
Product type: Liquid membrane
Use
Field of use: Indoors, outdoors
Merchandise group: Waterproofing & structural protection
Application
Yield: 2,0 kg/m²
Application temperature: +5 °C to +40 °C

Data sheets

Data sheets and documents

All documents come unchanged from the manufacturer.

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Soudal N.V.
Everdongenlaan 18-20
2300 Turnhout
Belgium

Electronic address verkauf@soudal.com

All products by Soudal

Information as of: 2026-09-17

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


For your project

These products go with it

Project: Seal windows and doors to RAL guidelines

Execute the connection joint in three layers: airtight inside (acrylic A710 or interior tape), insulated in the middle (assembly foam or multifunctional tape), driving-rain-tight and vapour-permeable outside (S730 or exterior membrane). Inside must always be tighter than outside.

  1. Apply

    • Part of the system Insulates the middle layer; can only be applied with a foam gun
      €11.95 €15.93 / 1 Litre
    • Alternative One tape for all three layers – then without A710 and S730
      €23.29 €2.91 / 1 Metre
    • Alternative One tape for all three layers – then without A710 and S730. Choose the tape dimension according to window installation depth and joint width
      €23.99 €6.00 / 1 Metre
    • Alternative Narrow version (joint 4–30 mm) only for the lower connection – instead of the wide tape, not in addition. Choose the dimension according to the measured joint width
      €13.49 €3.37 / 1 Metre
  2. Seal & join

  3. Tools & accessories

  4. Finish & care

5 items selected