Skip to main content Skip to search Skip to main navigation

Schuller tiling sponge HYDRO - acid-resistant - 160×100×55 mm

Description

The HYDRO Tile Sponge from Schuller Eh'klar is a cleaning sponge specially for tiling. It reliably removes cement slurry, grout and dirt from the tile surface without damaging it. At 160 × 100 × 55 mm it sits well in the hand and is suitable for daily use on building sites.

Benefits at a glance

  • ✅ Acid-resistant – suitable for contact with grouting and cleaning agents
  • 💧 Extremely absorbent – reliably picks up water and slurry
  • 💪 High durability and strength for repeated use
  • 📐 Handy size of 160 × 100 × 55 mm
  • 🔄 Can be used repeatedly with correct care

Areas of application

  • 🧽 Washing down tiles after laying
  • 🧱 Removing cement slurry and grout residues
  • 🏗️ Use on building sites and in the tiling trade
  • 🏠 Also suitable for renovation and DIY work

Product details

The HYDRO Tile Sponge is made of an absorbent, acid-resistant sponge material designed for contact with cement, grout and acid-containing cleaners. Compared with simple household sponges, it offers greater strength and lasts considerably longer in everyday building-site use.

Application tip

For a clean result keep the sponge damp and wash it out regularly. After use, clean with a suitable cleaner and do not store permanently in direct sunlight, in order to preserve durability.

What's included

1 × HYDRO Tile Sponge, 160 × 100 × 55 mm.

Technical data

Pack size: 1 piece
Size: 160 x 100 x 55 mm
Technical data
Dimensions: 100 x 55 mm
Product group: Buckets, scrapers & sprayers
Use
Merchandise group: Tools, painting supplies & protective equipment
What's included
Supplied as: 1 pc.

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Schuller Eh'klar GmbH
Im Astenfeld 6
4490 St. Florian
Austria

Electronic address office@schuller.eu

All products by Schuller Eh'klar

Information as of: 2026-09-17

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


For your project

These products go with it

Project: Waterproof shower and bathroom

Pre-coat absorbent substrates, embed corners, pipe penetrations and floor drain with sealing tape and moulded parts and roll on the liquid membrane in at least two coats. After drying, tile onto it in a thin bed and close the corner and connection joints elastically with sanitary silicone.

  1. Prepare the surface

    • Part of the system for absorbent substrates such as plasterboard, plaster, concrete, screed
      €5.95
    • Alternative instead of a primer coat on gypsum plaster and anhydrite screed
      €6.99
  2. Apply

  3. Seal & join

  4. Tools & accessories

11 items selected