Ottocoll S610 2K silicone adhesive 490 ml
€69.49
- Two-component, so curing can be controlled and is fast
- Bonds glass to metal, ceramics or plastic
- Stays elastic and takes up vibration
- Also for load-bearing and safety-relevant bonds
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
OTTOCOLL® S 610 is a high-performance 2K silicone adhesive for demanding bonding in construction and industry. It impresses with fast curing, extreme load capacity and reliable adhesion on numerous substrates.
Benefits & features
- ✔ Very fast and controlled curing thanks to 2K system
- ✔ High temperature and weather resistance
- ✔ Excellent adhesion on glass, metal, ceramics and many plastics
- ✔ Permanently elastic and vibration-resistant
- ✔ Ideal for structural and safety-relevant bonding
Areas of application
- Bonding glass, metal and ceramic elements
- Assembly work in facade, window and metal construction
- Fixing components exposed to high dynamic loads
- Alternative to mechanical fastenings in hard-to-reach areas
- Solves problems such as insufficient adhesion, long drying times or material movements
Detailed product description
The 2K silicone adhesive OTTOCOLL® S 610 is based on high-quality silicone resin and cures evenly through independently of atmospheric humidity. Its pasty consistency enables precise application, while the chemical crosslinking ensures an exceptional temperature resistance from –40 °C to +180 °C. Compared with standard silicones, OTTOCOLL® S 610 offers considerably higher structural strength and is therefore ideal for professional applications in construction, trades and the industrial environment. For optimum results the substrates should be clean, dry and free of grease; even mixing of both components is decisive.
Technical data
| Property | Value |
|---|---|
| Colour | various standard colours (e.g. grey, black) |
| Container size | e.g. 400 ml cartridge (2K) |
| Application temperature | +5 °C to +35 °C |
| Temperature resistance | –40 °C to +180 °C |
| Viscosity | pasty, non-sag |
| Curing time | depending on mixing ratio, typically a few hours |
| Shelf life | 12 months in unopened original container |
| Certificates / standards | depending on variant, e.g. CE marking |
FAQ – Frequently asked questions
How fast does OTTOCOLL® S 610 cure?
Thanks to the 2K system, curing takes place independently of atmospheric humidity and usually within a few hours.
Which materials does the adhesive adhere to?
It adheres excellently to glass, metal, ceramics and many plastics.
Is OTTOCOLL® S 610 suitable for outdoor use?
Yes, the adhesive is weather- and UV-resistant and therefore ideal for outdoor applications.
Can the adhesive replace mechanical fastenings?
In many cases yes, especially for structural bonding with high elasticity.
How should the substrate be prepared?
The surface must be clean, dry and free of dust, oil and grease.
Technical data
| Version | |
|---|---|
| Colour: | light grey |
| Technical data | |
| Contents: | 490 ml |
| Product group: | 2-component adhesive |
| Use | |
| Merchandise group: | Adhesives |
| Application | |
| Application temperature: | +5 °C to +35 °C |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project