Skip to main content Skip to search Skip to main navigation

Glutoclean green deposit remover ready to use against algae 5 l

Description

Glutoclean green deposit remover is a ready-to-use, water-based green deposit remover with a quaternary ammonium salt as active substance that removes algae, mould and similar green deposits from mineral exterior surfaces. It is chlorine-free, odour-neutral and applied undiluted. According to the manufacturer, the 5 l canister covers around 50 m².

Benefits at a glance

  • Ready to use: no measuring or mixing, apply straight from the canister.
  • Works on its own: leave to act for at least 24 hours after application; one application is usually sufficient.
  • Deep-acting: according to the manufacturer, it acts deep into stone, render, ceramics and concrete.
  • Pleasant to use: chlorine-free and odour-neutral, pH 7–8.
  • Flexible application: with pressure sprayer, brush or scrubbing brush.

Areas of application

  • Patios, footpaths and garage driveways
  • Facades, plinths and walls made of render, stone or concrete
  • Roofs and fences
  • Ceramic coverings outdoors

Limits & notes

The data sheet lists stone, render, ceramics and concrete as substrates; the manufacturer gives no information on other materials. The product is classified as harmful to aquatic life with long-lasting effects: do not allow residues to enter watercourses, drains or sewers. Use biocides safely. Always read the label and product information before use.

Application & tips

Apply the green deposit remover undiluted and evenly to the affected surface with a pressure sprayer, brush or scrubbing brush and leave to act for at least 24 hours. For heavy growth, brush off residues afterwards or repeat the application. If the surface is to be painted or impregnated afterwards, wash it with water first. Use only outdoors or in well-ventilated areas, do not breathe spray mist and wear protective gloves and safety glasses. Clean tools with water after use. Store the canister tightly closed, cool and frost-free, not outdoors and out of the reach of children.

Frequently asked questions

Do I need to dilute the green deposit remover?
No, the product is ready to use and applied undiluted.

How much area does one canister cover?
According to the manufacturer, 5 litres cover approx. 50 m², i.e. around 0.1 litres per square metre.

When will the deposit disappear?
The product must act for at least 24 hours. Stubborn residues can then be brushed off or removed with a second application.

Can I paint or impregnate the surface afterwards?
Yes, but it should be washed with water first.

Technical data

Area of use: Exterior
Base: Water-based
Content: 5 l
Pack size: 5L jerrycan
Technical data
Active substance: Quaternary ammonium compounds, di-C8-10-alkyldimethyl, chlorides (CAS 68424-95-3)
pH value: 7–8
Density: approx. 1 g/cm³ (20 °C)
Biocide reg. no.: BAuA N-117370
Processing
Dosage: ready to use, undiluted
Contact time: min. 24 hours
Application: pressure sprayer, brush or scrubbing brush
Use
Coverage: approx. 50 m² per 5 l
Substrates: stone, render, ceramics, concrete
Scope of delivery
Packaging: 5 l canister

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Glutolin Renovierungsprodukte GmbH
Im Schedetal 1
34346 Hann. Münden
Germany

Electronic address sds@glutolin.de

Information as of: 2026-10-26

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


For your project

These products go with it

Project: Clean and protect the façade

Remove algae and moss growth, close cracks and cover windows and ground. Treat the mineral, not rain-soaked façade from top to bottom with a siloxane water repellent. If the surface is to be coloured, then paint with siloxane façade paint, with an additive against algae and fungi where algae are a risk.

  1. Prepare the surface

  2. Apply

  3. Tools & accessories

11 items selected