Skip to main content Skip to search Skip to main navigation

Ponal Construct PU construction adhesive D4 waterproof 440 g

Description

The Ponal Construct is a universal adhesive for spot and full-surface assembly bonding of different material combinations. It is gap-filling, non-sag, highly heat-resistant and water-resistant to DIN EN 204/D4.

Your benefits

  • Short pressing time and extremely high final strength
  • Non-sag, easy to spread and gap-filling
  • Solvent-free
  • Water-resistant to DIN EN 204/D4
  • Also suitable for natural stone bonding such as marble

Areas of application

  • Spot and full-surface assembly bonding
  • Bonding different material combinations
  • Natural stone bonding, e.g. marble
  • Structural bonding indoors and outdoors

Technical details and application

The bonding surfaces must be sound, clean, dry and free of grease and dust. Apply the adhesive in spots or over the surface, join the parts and fix them under pressure within the pressing time. Heat resistance to DIN EN 14257 is over 8 N/mm². Observe the manufacturer's information on pressing time and load-bearing capacity.

Technical data

Area of use: Exterior, Interior
Technical data
Contents: 440 g
Product type: Assembly adhesive
Standards
Standard: DIN EN 204
Use
Field of use: Outdoors, indoors
Merchandise group: Adhesives

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Henkel AG & Co. KGaA
Henkelstraße 67
40589 Düsseldorf
Germany

Electronic address corporate.communications@henkel.com

All products by Ponal

Information as of: 2026-09-17

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


For your project

These products go with it

Project: Bond strips, boards and panels

Bond strips, panels and wall boards onto a clean, load-bearing and dust-free substrate; absorbent surfaces such as plaster or concrete need a primer depending on the adhesive. Apply the adhesive in strips or, for large boards, over the full surface with the notched trowel and fix the parts until the adhesive has grabbed.

  1. Prepare the surface

  2. Seal & join

  3. Tools & accessories

  4. Finish & care

3 items selected