€10.29
- Bonds at once and cures through very quickly
- Non-slump on a PU base, it does not sag
- Bonds brick, timber, stone, polystyrene and plastic
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Ottocoll Rapid is a super-strong assembly adhesive. Ottocoll Rapid Assembly Adhesive has immediate strong tack with extremely fast curing. Ottocoll Rapid Power Adhesive is almost universally usable for: bonding, fixing, bricks, assembling, wood, stone, polystyrene foam and plastics.
- Non-sag adhesive based on PU
- Extremely fast curing
- Extremely high bond strength
- Short pressing and fixing times
- Almost universally usable
- Solvent-free
- Odour-neutral
- Non-corrosive
Areas of application of Ottocoll PU Adhesive:
- For construction, fit-out, assembly
- For bonding, assembling, repairing materials such as wood and wood-based materials, metals (aluminium, stainless steel, copper etc.), stone, natural stone, ceramics, brick, plastics (rigid PVC, GRP etc.), insulation materials (polystyrene foam, PU, etc.), fire-protection building boards (plasterboard etc.)
- Caution, not suitable for butt-joint bonding of gypsum fibreboards
Standards and tests:
- Meets the requirements of DIN EN 204-D4 for weather-resistant bonding of wood and wood-based materials
- Meets the requirements of DIN EN 14257 (WATT 91) for heat-resistant bonding of wood and wood-based materials
- “Particularly recommendable low-emission building product” according to the building materials list (TOXPROOF) of TÜV Rheinland
Special notes:
Before using the adhesive / sealant, the user must ensure that the materials in the contact area (solid, liquid and gaseous) are compatible with the adhesive / sealant and do not damage or alter it (e.g. discolour it). For materials that are subsequently processed in the area of the adhesive / sealant, the user must clarify beforehand that their ingredients or emissions cannot impair or alter the adhesive / sealant (e.g. discolouration). If necessary, the user must consult the respective manufacturer of the materials. For bonding outdoors under the effect of moisture and / or UV radiation we recommend using our hybrid adhesives such as OTTOCOLL M 500, OTTOCOLL Allflex, OTTOCOLL M 590 or OTTOCOLL M 570. The exception is weather-exposed bonding of wood and wood-based materials with a subsequent protective coating in accordance with DIN EN 204 D4. Paints, varnishes, plastics and other coating materials must be compatible with the adhesive / sealant. The tools can be cleaned with OTTO Cleaner MP as long as the adhesive has not yet set. Cured adhesive can only be removed mechanically. Under UV exposure, discolouration cannot be ruled out. Not suitable for bonding glass, polyethylene (PE), polypropylene (PP), polyamide (PA), polytetrafluoroethylene (PTFE), bituminous, waxy or oily substrates or the like. Not suitable for butt-joint bonding of gypsum fibreboards.
Pre-treatment:
The bonding surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants and other substances that impair adhesion, must be removed. Cleaning non-porous substrates: clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous substrates: clean surfaces of loose particles mechanically, e.g. with a steel brush or a grinding disc. Sand smooth surfaces and remove the dust. The bonding surfaces must be clean, free of dust and grease and sound
Application:
Curing takes place by reaction with moisture. This produces small amounts of CO2, which causes an increase in volume of the adhesive. It is sufficient to apply the adhesive to one side. If necessary, spread over the surface with a spatula or similar. One of the substrates should be porous or permeable to water vapour. The time to curing can be shortened by adding moisture and by higher temperatures. The moisture required for curing can, if necessary, be provided by lightly spraying with water. The bonding surfaces may be slightly damp, but not wet. The parts to be bonded should be joined together immediately if possible, at the latest within the skin-forming time. Fix the materials to be bonded until the adhesive has cured completely. Because of the many possible influences during processing and application, the applicator must always carry out a trial application.
Application temperature: +5ºC to +35ºC.
Application method: apply with a manual caulking gun, compressed-air gun or cordless gun.
Cleaning: with white spirit before curing, afterwards removable with silicone remover or mechanically.
Smoothing: with smoothing agent and scraper before a skin forms.
Storage:
Storage stability at 23 °C / 50 % RH for cartridge/bag 9 months.
The specific use-by date can be found printed on the container and must be observed. We recommend storing Otto Chemie adhesives and sealants in the unopened original containers dry (< 60 % RH) in a temperature range of + 15° C to + 25° C. If the products are stored and/or transported for longer periods (several weeks) at higher temperature/humidity, a reduction in shelf life or a change in material properties cannot be ruled out.
Supplied as:
310 ml cartridge Ottocoll Rapid Assembly Adhesive
Colour:
beige, old grey
Technical data
| Version | |
|---|---|
| Colour: | old grey |
| Standards | |
| Standard: | DIN EN 204 |
| Use | |
| Merchandise group: | Adhesives |
| Application | |
| Application temperature: | +5ºC to +35ºC |
| What's included | |
| Supplied as: | 310 ml cartridge Ottocoll Rapid assembly adhesive |
| Storage | |
| Storage: | Storage stability at 23 °C / 50 % RH for cartridge/pack 9 months |
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews (1)
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
1 review
4 December 2022 12:00
Einfach in der Anwendung, super Resultate
Tut das was er soll. Einfach in der Anwendung super Resultate. Kein Grund zum Meckern
For your project