€11.95
- Hand-tight after about twenty minutes
- Fully load-bearing after around three hours
- Allows work to carry on quickly the same day
- Can be used indoors and outdoors
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Ottocoll M530 is the perfect solution for bonding indoors and outdoors where speed is essential. The bond is hand-strong after only 20 minutes and functionally strong after 3 hours. This ensures that work can continue quickly.
- Hand-strong after 20 minutes and functionally strong after 3 hours
- Quick continuation of work possible with thin adhesive layer and diffusion-open materials
- High final strength Withstands high mechanical stresses
- Also adheres to damp substrates No lost working time through drying of the substrates
- Elastic Compensates for movement in thicker adhesive layers
- Isocyanate-free Very low emission (EMICODE EC1 PLUS)
- Silicone-free
- Natural stone compatible Causes no greasing on natural stone
Areas of application:
- Bonding stone, natural stone and ceramics
- Bonding window sills, skirting boards, decorative strips and stair treads
- For elastic bonding and assembly of a wide variety of materials such as wood, wood-based materials, plastics, metals and mineral substrates
Pre-treatment:
The bonding surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesives/sealants and other substances that impair adhesion, must be removed. Cleaning non-porous substrates: clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous substrates: clean surfaces of loose particles mechanically, e.g. with a steel brush or a grinding disc. The bonding surfaces must be clean, free of dust and grease and sound.
Primer:
The requirements for elastic seals and bonds depend on the respective external influences. Extreme temperature fluctuations, expansion and shear forces, repeated contact with water etc. place high demands on an adhesive bond. In such cases, where recommendations are given (e.g. +/OTTO Primer 1216), the use of the primer named is advisable in order to achieve as durable a bond as possible.
Application:
Application temperature: +5ºC to +35ºC.
Application method: apply with a manual caulking gun, compressed-air gun or cordless gun.
Cleaning: with white spirit before curing, afterwards removable with silicone remover or mechanically.
Smoothing: with smoothing agent and scraper before a skin forms.
Special notes:
Before using the adhesive / sealant, the user must ensure that the building materials in the contact area (solid, liquid and gaseous) are compatible with the adhesive / sealant and do not damage or alter it (e.g. discolour it). For building materials that are subsequently processed in the area of the adhesive / sealant, the user must clarify beforehand that their ingredients or emissions cannot impair or alter the adhesive / sealant (e.g. discolouration). If necessary, the user must consult the respective manufacturer of the building materials. For UV-exposed bonding/sealing of glass we recommend using our high-quality silicone adhesives / sealants such as OTTOSEAL S110 / OTTOSEAL S120 (for glazing rebate sealing), OTTOSEAL S10 (among others for bonding), OTTOSEAL S7 (for weather sealing) or OTTOCOLL S81 (for bonded windows). For UV-exposed bonding/sealing of transparent plastics such as acrylic glass we recommend our silicone sealant OTTOSEAL S72. A change in properties (e.g. colour, mechanics) due to external influences (especially with translucent substrates or wide adhesive joints), e.g. UV radiation, cannot be ruled out. The bond line must be designed accordingly. On contact with non-ferrous metals, discolouration of the adhesive (especially with full-surface bonding) cannot be ruled out. Not suitable for sealing/bonding copper under UV/temperature exposure.
Storage:
Can be stored cool and dry.
Supplied as:
310 ml cartridge
Colour:
white
Technical data
| Technical data | |
|---|---|
| Product group: | Assembly adhesive |
| Use | |
| Merchandise group: | Adhesives |
| What's included | |
| Supplied as: | 310 ml cartridge |
| Storage | |
| Storage: | Can be stored cool and dry |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews (1)
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
1 review
27 September 2025 12:00
Super Produkt
Ich habe diesen Klebstoff früher nur über Betrieb erworben. Bin richtig froh, das Baustoffhandel den anbietet. Super Produkt.
For your project