Ottocoll A266 FixFritz strongly adhesive fixing adhesive
€5.29
- Very high initial tack, so the part does not slip off
- For panels, decorative mouldings and insulation boards
- Also usable on expanded and extruded polystyrene
- Free of solvent and odourless
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Ottocoll A 265 TopFix assembly adhesive with very high initial tack and final strength. Ottocoll A 265 TopFix is a super-fast assembly adhesive for panels, decorative mouldings, decorative profiles, insulation boards, e.g. made of Styropor, Styrodur etc. Ottocoll A 265 TopFix is an odourless, solvent-free assembly adhesive.
- Non-sag acrylate-based adhesive for many assembly jobs
- Solvent-free
- Extremely high initial tack and final strength
- Odour-neutral
Areas of application:
- Bonding corrosion-protected metals such as aluminium, stainless steel, anodised aluminium
- Bonding wooden & PVC skirting boards
- Bonding wood and wood-based materials such as panels, decorative mouldings, decorative profiles
- Bonding decorative and insulation boards, e.g. made of Styropor®
- Bonding stucco and ceiling profiles
- Bonding PVC cable ducts
- Bonding stone, including natural stone and ceramic tiles
- Bonding plasterboard
- Bonding mineral substrates such as concrete
- Not suitable for PE, PP, PA, PTFE etc.
Standards and tests:
- LEED® compliant IEQ credits 4.1 adhesives and sealants
Special notes:
Before using the adhesive / sealant, the user must ensure that the materials in the contact area (solid, liquid and gaseous) are compatible with the adhesive / sealant and do not damage or alter it (e.g. discolour). For materials that are subsequently processed in the area of the adhesive / sealant, the user must clarify beforehand that their ingredients or emissions cannot impair or alter the adhesive / sealant (e.g. discolouration). If necessary, the user must consult the respective manufacturer of the materials. Not suitable for bonding glass (for this we recommend Ottocoll M500 Hybrid Adhesive), polyethylene (PE), polypropylene (PP), polyamide (PA), polytetrafluoroethylene (PTFE), bituminous substrates (for this we recommend Ottoseal A250 Bitumen compatible sealant), waxy or oily substrates or similar. Not suitable for bonding acrylic glass (for this we recommend Ottoseal S72 Acrylic Glass Silicone). Not suitable for mirror bonding (for this we recommend Ottocoll S16 Mirror Adhesive). Not suitable for metals that are not corrosion-protected and non-ferrous metals. Can lead to corrosion. After curing, the product is completely odourless, physiologically harmless and inert.
Pre-treatment:
The bonding surfaces must be clean, free of grease, dry and sound. The bonding surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants and other substances that impair adhesion, must be removed. Cleaning non-porous substrates: clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous substrates: clean surfaces of loose particles mechanically, e.g. with a steel brush or a grinding disc.
Application notes:
A bonding surface must be absorbent. Apply OTTOCOLL TopFix in dots or beads. Full-surface application (e.g. with a notched spatula) is also possible. Bond while OTTOCOLL TopFix is still wet (approx. 5 min.). Support or fix stressed or very heavy parts. Remove adhesive residues immediately with a damp cloth. Because of the many possible influences during processing and application, the applicator must always carry out a trial application. The specific use-by date can be found printed on the container and must be observed.
Application:
Application temperature: +5ºC to +35ºC.
Application method: apply with a manual caulking gun, compressed-air gun or cordless gun.
Cleaning: with white spirit before curing, afterwards removable with silicone remover or mechanically.
Smoothing: with smoothing agent and scraper before a skin forms.
Storage:
Store OTTOCOLL TopFix in the unopened original containers dry (< 60 % RH) in a temperature range of + 15° C to + 25° C. If OTTOCOLL TopFix is stored and / or transported for longer periods (several weeks) at higher temperature/ humidity, a reduction in shelf life or a change in material properties cannot be ruled out.
Supplied as:
310 ml cartridge
Colour:
pearl white
Technical data
| Technical data | |
|---|---|
| Product group: | Assembly adhesive |
| Use | |
| Merchandise group: | Adhesives |
| What's included | |
| Supplied as: | 310 ml cartridge |
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project