Skip to main content Skip to search Skip to main navigation

GORI 33 Sensitiv stain 5.0 l thin-film wood stain wood protection

Description

The GORI 33 Sensitiv Stain is a water-based thin-film wood stain with DIN EN 71 Part 3 certification – developed specially for wood protection in sensitive areas such as kindergartens, schools and playgrounds. The low-emission, low-odour formula reliably protects all wood surfaces with limited or no dimensional stability against weather and greying – indoors and outdoors – without film formation or flaking.

✅ Your benefits at a glance

  • 🌿 Water-based – low odour in application, tested to DIN EN 71-3 for saliva and sweat resistance
  • 🔬 DIN EN 71 Part 3 certified – tested safety for children's toys: approved for playgrounds, kindergartens and schools
  • ☀️ Eroding weathering – no flaking, no cracking – even weathering without film formation for low-maintenance care
  • 💧 Low-drip & fast-drying – can be overpainted after a short drying time, clean application for professionals and DIY enthusiasts
  • 🎨 8 shades available – from light oak and pine to colourless and white, also usable on oak and Framire

🏗️ Areas of application

  • 🏫 Sensitive areas: kindergartens, schools, hospitals, playgrounds and wall panelling
  • 🏠 Wooden facades & exterior components – for all wood surfaces with limited or no dimensional stability outdoors
  • 🪵 Interior applications – wall panelling, furniture and dimensionally stable wooden components indoors
  • 🔧 Suitable woods: spruce, pine, larch, fir, oak, Framire, meranti and many more

📋 Technical properties

  • Base: water-based alkyd synthetic resin, low in solvent
  • Coverage: approx. 80 ml/m² – 1 litre is enough for approx. 12 m² (planed wood)
  • Drying time: can be overpainted after approx. 4–6 hours (at 23 °C, 50 % rel. humidity)
  • Paint system: 2 coats recommended (primer + final coat)
  • Application: brush, roller or airless spray equipment
  • Container size: 5.0 litres
  • Certification: DIN EN 71 Part 3 (safety of toys)

🔧 Substrate & application

Free the substrate of dirt, algae, mould and loose paint particles. Scrape out resin spots and clean with a suitable agent. Sand heavily weathered surfaces down to sound wood. Lighten greyed wood if necessary with GORI Universal Wood Bleach 3061. Remove old varnish and thick-film stains completely; lightly sand intact thin-film stains.

⚠️ Important: Do not apply at temperatures below +10 °C or relative humidity above 80 %. Use material of the same batch no. on one surface to ensure colour consistency. Seal end-grain surfaces (end and cut points) with additional coats.

💡 Note on shades: Stains let the substrate show through – the shade varies depending on the type of wood. Always check the shade by test coat; sample-matching shades only appear after complete drying.

Storage: Close the container well after use. Store and transport cool, dry and frost-free.

Technical data

Version
Colour: colourless
Technical data
Base: Water-based alkyd synthetic resin, low in solvent
Contents: 5,0 l
Product type: Wood stain
Standards
Standard: DIN EN 71
Use
Merchandise group: Paints, varnishes & wood preservation
Application
Yield: 80 ml/m²
Storage
Storage: Close the pack well after use

Data sheets

Data sheets and documents

All documents come unchanged from the manufacturer.

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address PPG Coatings Deutschland GmbH
Feldstr. 5A
44867 Bochum
Germany

Electronic address info@sigmacoatings.de

All products by Gori

Information as of: 2026-09-17

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


For your project

These products go with it

Project: Paint and oil outdoor wood

Clean and brighten greyed wood, let it dry and sand loose fibres; then stain, paint or oil. Stay within the system: oil only on raw or already oiled wood, not over stain or paint.

  1. Prepare the surface

  2. Tools & accessories

4 items selected