Düfa D424 silk latex paint silk gloss white scrub-resistant
€26.49
- Wet abrasion class 1: it takes frequent damp wiping for good
- A silk gloss surface (G2a) that is easy to keep clean
- Opacity class 2 at approx. 7 m² per litre and coat
- Particularly suitable for glass fabric, woodchip and textured wallpaper
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Düfa D424 Silk Latex is a silk-gloss latex paint based on polyvinyl acetate dispersion for hard-wearing, easy-to-clean interior coatings. To DIN EN 13300 it reaches wet abrasion class 1 and hiding power class 2. The 2.5 l bucket covers around 9 m² with two coats – for painters and renovators who paint hallways, stairwells or children's rooms.
Benefits at a glance
- For heavily used surfaces: wet abrasion class 1 to DIN EN 13300 – the wall withstands repeated wet cleaning.
- Silky gloss: gloss level G2a (medium gloss), the surface is easy to clean.
- Good hiding power: contrast ratio class 2 at a coverage of approx. 7 m²/l.
- Structure-preserving: fine grain S1, glass fabric and woodchip wallpaper keep their structure.
- Low-emission: under 1 g/l VOC, solvent-free and plasticiser-free according to VdL guideline 01.
- Tintable: with a maximum of 5 % full-shade and tinting paint on a dispersion basis.
Areas of application
- Hallways, stairwells, children's rooms, living and working rooms
- Glass fabric, glass and cellulose fleeces, woodchip wallpaper, textured and paper wallpapers
- Lime-cement and gypsum plasters, concrete, plasterboard and fibre cement boards
- Renovation of sound old dispersion coats
Limits & notes
Silk latex is an interior paint; for exterior walls a facade paint is the right choice. Silk-gloss surfaces show unevenness and overlaps more clearly than matt ones – prepare the substrate carefully and work wet-on-wet. Do not apply below +5 °C room and substrate temperature.
Hazard statements: Warning. May cause an allergic skin reaction. Safety data sheet available from the manufacturer.
Application & tips
The substrate must be firm, dry, clean and sound, free of efflorescence, sinter layers and release agents. Stir the paint and apply with brush, roller (interior paint roller with 12 mm pile) or airless. Dilute the intermediate coat with at most 10 % water, the final coat undiluted or with at most 5 % water; roll the last coat in one direction. Avoid skin contact; when spraying wear safety goggles and respiratory protection with combination filter A2/P2 and ventilate well. At 20 °C and 65 % humidity it can be overpainted after approx. 4 hours and is through-dry after approx. 4 days. Clean tools immediately with water and a little washing-up liquid. Store cool, dry and frost-free, close opened containers tightly.
Frequently asked questions
How much area can I cover with 2.5 litres?
At approx. 145 ml/m² per coat on a smooth substrate around 17 m² painted once or 9 m² painted twice; rough surfaces need more.
Is silk latex washable?
Yes. With wet abrasion class 1 the paint achieves the highest scrub resistance class to DIN EN 13300. Before the first wet cleaning, wait for the through-drying time of approx. 4 days.
Is the paint very glossy?
No, it is silk-gloss (G2a, medium gloss) – considerably less than a varnish, but visibly more than a matt wall paint.
Can I tint silk latex?
Yes, with up to 5 % full-shade and tinting paint on a dispersion basis; on one surface use material from one batch only.
Technical data
| Area of use: | Interior |
|---|---|
| Base: | Water-based |
| Colour: | white |
| Content: | 2.5 l |
| Gloss level: | Silk gloss |
| Material: | PVAc (polyvinyl acetate) |
| Pack size: | 2.5 L bucket |
| Technical data | |
|---|---|
| Classification DIN EN 13300: | Wet abrasion class 1, opacity class 2 at approx. 7 m²/l, gloss level G2a (medium gloss), grain size S1 fine |
| Water vapour diffusion: | Class V2 to DIN EN ISO 7783-2 (sd ≥ 0.14 and < 1.4 m) |
| Density: | approx. 1,33 g/cm³ |
| VOC content: | below 1 g/l (limit 30 g/l) |
| GISCODE: | BSW20 |
| Tintability: | max. 5 % full-tone and tinting paint on a dispersion base |
| Application | |
| Consumption: | approx. 145 ml/m² per coat on a smooth, slightly absorbent substrate |
| Application: | Brush, roller (12 mm pile) or airless (nozzle 0.018–0.021 inch, 120–180 bar, 50 degrees) |
| Thinning: | Intermediate coat max. 10 %, top coat max. 5 % water |
| Application temperature: | from +5 °C (object and air) |
| Drying: | overpaintable after approx. 4 hours, dried through after approx. 4 days (20 °C, 65 % RH) |
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Meffert AG Farbwerke
Sandweg 15
55543 Bad Kreuznach
Germany
Electronic address info@duefa.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project