Biwa P950 insulation adhesive B1 perimeter adhesive foam 750 ml
€9.79
- Bonds EPS and XPS insulation boards from the gun can
- Saves considerable time compared with adhesive mortar
- Usable from the basement plinth to the flat roof
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
The Insulation Adhesive P950 is a 1K PU adhesive foam from the gun can for quick, clean bonding of thermal insulation boards made of EPS and XPS. It is suitable for flat roofs, perimeter, facades and basement ceilings and ensures a secure, lasting bond of insulation boards.
Benefits at a glance
- ⏱️ Working time reduced by up to 30 %
- ❄️ High initial tack even at low temperatures
- 📐 Also suitable for vertical bonding
- ♻️ Free disposal of the packaging via the P.D.R. system
- 🔥 Building material class B1 – flame-retardant to DIN 4102-1
Areas of application
- 🏗️ Bonding EPS, XPS, PU and phenolic resin rigid foam boards
- 🏠 Use on flat roofs, perimeter, facades, drainage elements and basement ceilings
- 🧱 Filling cavities between insulation elements
- ⚖️ Light alternative to PU roof adhesive and adhesive mortar
Technical properties
The insulation adhesive is solvent-free, HCFC- and CFC-free and has a thermal conductivity of 0.035 W/(m·K). Can be applied at +5 °C to +25 °C can temperature and -5 °C to +35 °C bonding surface temperature. After approx. 2 hours the bond can be reworked; can be stored unopened for 12 months. Flexible, does not embrittle, water-resistant (not waterproof), ageing-resistant, but not UV-resistant.
Application tip
Shake the can vigorously approx. 30 times before use, apply an adhesive bead of 30 mm diameter and press the insulation board on within approx. 8 minutes. Plan for at least 3 adhesive beads per m², correspondingly more in edge and corner areas.
Technical data
| Technical data | |
|---|---|
| Contents: | 750 ml |
| Product type: | Insulation adhesive |
| Standards | |
| Building material class: | B1 |
| Standard: | DIN 4102-1 |
| Use | |
| Merchandise group: | Construction foam & PU foam |
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Birtel KG
Noswendeler Str. 7a
66687 Wadern
Germany
Electronic address
info@birtelkg.de
Phone: +49 6871 922440
Information as of: 2026-09-18
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project