BIWA insulation adhesive B1 adhesive foam, 12 × 750 ml
€95.99
- A reserve for larger facade areas
- Not readily flammable to B1
- Solvent-free, suitable for sensitive insulating materials as well
- Stays able to bond in damp conditions
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
The BIWA Insulation Adhesive is a 1-component polyurethane adhesive foam for bonding thermal insulation boards. It is applied in beads with the foam gun and replaces conventional adhesive mortar. This pack contains twelve cans of 750 ml each.
Benefits
- Pack of 12 × 750 ml, designed for larger façade surfaces
- Building material class B1 to DIN 4102, flame-retardant
- Solvent-free, therefore also usable on sensitive insulation materials
- Waterproof, does not lose its adhesive strength in moisture
- Resistant when cured from −40 °C to +90 °C
Areas of application
- Bonding thermal insulation boards on façades and interior walls
- Perimeter insulation in the ground-contact area
- External thermal insulation composite systems
- Compared with adhesive mortar, mixing is eliminated and the surface can be loaded considerably sooner
Product details
The adhesive foam consists of polyurethane and is yellow to champagne-coloured. It cures through atmospheric humidity. When cured it is resistant from −40 °C to +90 °C. Made in Switzerland.
The substrate must be load-bearing, dust-free and sufficiently level. Shake the can vigorously and screw it upright into the gun. Apply beads around the edge and in the middle, let the board flash off briefly and then position it. Remove fresh foam immediately with PU cleaner.
Technical data
| Colour: | champagne, yellow |
|---|---|
| Content: | 750 ml |
| Material: | Polyurethane (PU) |
| Technical data | |
|---|---|
| Product type: | Insulation adhesive |
| Temperature resistance: | −40 °C to +90 °C |
| Standards | |
| Building material class: | B1 to DIN 4102 |
| Use | |
| Merchandise group: | Construction foam & PU foam |
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Birtel KG
Noswendeler Str. 7a
66687 Wadern
Germany
Electronic address
info@birtelkg.de
Phone: +49 6871 922440
Information as of: 2026-09-18
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project