Sparvar Rallye Wheel Spray Rim Paint Abrasion-Resistant 400 ml
€6.79
- Abrasion-resistant acrylic resin paint for rims and vehicle parts
- Next coat after just 5 to 10 minutes waiting time
- Aromatic-free formula with propane-butane propellant
- Can be used as a system with Rallye primer and clear coat 5007
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Sparvar Rallye wheel spray is a spray paint based on acrylic resin for rims, hubcaps and painted metal parts on cars, mopeds and motorbikes. The paint is abrasion-resistant and free of aromatics; the propellant is propane-butane. The 400 ml spray can is meant for DIYers and hobby mechanics who want to refresh a rim or a component without a spray gun. This variant comes in the colour rim silver.
Benefits at a glance
- Abrasion-resistant: According to the label, the acrylic resin paint is designed for heavily stressed parts such as rims.
- Short waiting time: 5 to 10 minutes between two thin coats are enough.
- Free of aromatics: The formula contains no aromatic solvents.
- Expandable system: Rallye-Spray Primer underneath, clear coat 5007 on top for sealing, both from the same range.
- No equipment needed: Shake, spray, done, without compressor or spray gun.
Areas of application
- Steel and alloy rims, hubcaps and wheel trims
- Frames and components on mopeds, motorbikes and go-karts
- Metal parts in garage, workshop and garden
- Touching up small paint damage on vehicle parts
Limits & notes
According to the label, the paint is not petrol-resistant. Parts that come into contact with fuel, such as tanks or carburettor areas, require a petrol-resistant paint. On bare metal the top coat only adheres reliably with a primer.
Hazard statements: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Safety data sheet available from the manufacturer.
Application & tips
Clean and dry the surface and remove oil, grease and wax; prime bare metal beforehand with Rallye-Spray Primer. Mask adjacent areas and test-spray on a hidden spot. Shake the can vigorously until the mixing balls rattle freely and keep shaking while working. Spray from 25 to 30 cm in a cross pattern, ideally at 20 °C, several thin coats instead of one thick one. Contains solvents, flammable: only with good ventilation, away from ignition sources; wear safety glasses and solvent-resistant gloves (nitrile). When spraying indoors, use respiratory protection with an A2 gas filter. After use, turn the can upside down and spray until only gas escapes to keep the valve clear.
Technical data
| Area of use: | Exterior |
|---|---|
| Base: | Solvent-based |
| Content: | 400 ml |
| Material: | Synthetic resin |
| Pack size: | 400 ml spray can |
| Version | |
|---|---|
| Colour: | rim silver |
| Technical data | |
| Binder: | Acrylic resin |
| Propellant: | Propane-butane |
| Petrol-resistant: | no |
| VOC content: | max. 650 g/l |
| Application | |
| Spraying distance: | 25–30 cm |
| Ideal application temperature: | 20 °C |
| Waiting time between coats: | 5–10 min |
| Primer: | Rallye-Spray Primer (art. 4004) |
Frequently asked questions
Is Sparvar Rallye wheel spray petrol-resistant?
No, according to the label the paint is not petrol-resistant. It is therefore not suitable for tanks or parts in contact with fuel.
Do I need to prime a wheel before using Sparvar Rallye wheel spray?
On bare metal, yes: Sparvar recommends the Rallye-Spray Primer (Art. 4004) as a primer. Intact old paint only needs to be cleaned and degreased.
How long should I wait between two coats of Sparvar Rallye wheel spray?
5 to 10 minutes. Several thin coats from a distance of 25 to 30 cm give a better result than one thick coat.
What is the difference between Sparvar Rallye wheel spray and Sparvar Farbspray acrylic paint high gloss?
Rallye wheel spray comes in wheel shades such as wheel silver and wheel gold and is designed for abrasion-resistant vehicle parts. Farbspray acrylic paint covers RAL shades for furniture, metal and wood.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Spray Color GmbH
Merzenicher Weg 4
52399 Merzenich
Germany
Electronic address spraycolor@t-online.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.