Skip to main content Skip to search Skip to main navigation

Soudal Silirub N construction silicone neutral-cure 12.5E 310 ml grey

Description

Soudal Silirub N 12.5E grey is a polysiloxane-based construction silicone that cures neutrally with atmospheric moisture, for elastic construction, expansion and glazing joints. It is classified to EN 15651-1 as F-EXT-INT 12.5E and designed for a total movement capability of 20 %. The grey 310 ml cartridge is intended for tradespeople and DIYers, for example for joints on concrete, plaster and grey profiles.

Benefits at a glance

  • Clean application: non-sag paste, skin formation after approx. 5 minutes.
  • Permanently elastic: elongation at break approx. 800 %, recovery over 80 % to ISO 7389.
  • Weather-resistant: high UV resistance, very good ageing resistance, temperature-resistant from -60 to +120 °C.
  • Wide adhesion range: adheres to common construction substrates and bonds PVC, treated wood, metal and glass.
  • Neutral-curing: no vinegar odour during curing, MEKO-free and non-corrosive.

Applications

  • Construction and structural joints, including on window and door frames
  • Expansion joints between different building materials
  • Glazing and glass/frame sealing with wood, aluminium and PVC
  • Seals between PVC, treated wood, metal profiles and glass

Limitations & notes

Silirub N is not suitable for natural stone such as marble or granite, where edge staining can occur; a natural stone silicone is the right choice there. It does not adhere to PE, PP, PTFE or bitumen; avoid contact with bitumen, tar, copper, EPDM, neoprene and butyl. Do not use for permanent water immersion, aquariums or polycarbonate, and avoid direct contact with the edge seal of insulating glass or PVB film. For joints with greater movement, a class 25LM neutral silicone is more suitable. In dark or acidic environments the silicone may yellow slightly.

Application & tips

The substrate must be sound, clean, dry and free of dust and grease. Pre-treat porous substrates with Primer 150, smooth ones with activator or cleaner if necessary; carry out an adhesion and compatibility test beforehand. The joint should be 5 to 30 mm wide and at least 5 mm deep; ideally the width is twice the depth. Avoid three-sided adhesion by using a backer rod. Apply the silicone with a manual, cordless or pneumatic gun without trapping air, and tool it with smoothing agent before a skin forms; dip only the tool into the smoothing agent so the joint flanks stay clean, and do not work in direct sunlight. Apply at +5 to +35 °C; through-curing is approx. 2 mm in 24 hours. Ventilate well during application and curing. Remove fresh material immediately with a cleaner, cured material only mechanically. Store unopened in a cool, dry place at +5 to +25 °C; shelf life 12 months.

Technical data

Area of use: Exterior, Interior
Colour: grey
Content: 310 ml
Material: Silicone
Pack size: 310 ml cartridge
Technische Daten
Base: Polysiloxane, neutral cure
Class: EN 15651-1 F-EXT-INT 12.5E
Max. allowed total movement: ± 20 %
Shore A hardness: 25 ± 5
Elongation at break: approx. 800 % (ISO 37)
Temperature resistance: -60 °C to +120 °C
Verarbeitung
Skin formation: approx. 5 min
Curing speed: approx. 2 mm/24 h
Application temperature: +5 °C to +35 °C
Anwendung
Joint dimensions: width 5–30 mm, depth min. 5 mm

Frequently asked questions

What is the difference between Soudal Silirub N and Silirub PRO N?

Silirub N is a construction silicone of class 12.5E with 20 % allowed movement, PRO N a window silicone of class 25LM for joints with more movement. Silirub N is sufficient for normal building and glazing joints; for window connections with high movement PRO N is the safe choice.

How wide can a joint with Soudal Silirub N be?

Between 5 and 30 mm with a depth of at least 5 mm. Soudal recommends a joint width of twice the joint depth.

Can Silirub N construction silicone be used on natural stone?

No, staining can occur on marble, granite and other natural stone. A natural stone silicone is intended for this.

At what temperature can Soudal Silirub N be applied?

From +5 °C to +35 °C. Once cured, the silicone withstands -60 °C to +120 °C.

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Soudal N.V.
Everdongenlaan 18-20
2300 Turnhout
Belgium

Electronic address verkauf@soudal.com

All products by Soudal

Information as of: 2026-09-17

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.