Soudal PTFE Spray silicone-free lubricant for bearings and gears 400 ml
€5.49
- Lubricates chains, bearings and gears for the long term
- Silicone-free – does not hinder later painting or bonding
- Resistant to temperature changes from -50 to +250 °C per data sheet
- Precision nozzle sprays in any position, including overhead
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Soudal PTFE Spray is a lubricant based on a mineral oil blend with PTFE for moving parts made of metal and plastic. The lubricating film is silicone-free and, according to the technical data sheet, resistant to temperature changes from -50 to +250 °C. The 400 ml spray can with precision nozzle is aimed at workshops, maintenance departments and demanding DIY users.
Advantages at a glance
- Withstands high pressure: 2000 N weld load in the 4-ball EP test according to ASTM D2596.
- Wide temperature range: resistance to temperature changes from -50 to +250 °C according to the data sheet.
- Silicone-free: no wetting problems if the spot is later painted or bonded.
- Creeps into gaps: high penetration capacity, displacing water and dirt in the process.
- Sprays in any position: 360-degree valve and precision nozzle reach hidden spots even overhead.
Areas of application
- Roller bearings, axles and gears on machines
- Conveyor belts and drive chains in continuous operation
- Hinges, locks and running rails on gates and doors
- Sealing profiles made of rubber and plastic
- Sliding points on tools and equipment in the workshop
Limits & notes
Processing is possible between +5 and +35 °C – in frost the can cannot be used sensibly. Soudal recommends testing the spray on the respective material before use, especially with sensitive plastics. Surfaces that need friction – brakes, V-belts, clutches – generally do not belong with a lubricant. Where a permanently standing grease film is required, a lithium spray grease is the more suitable choice.
Hazard information: Danger. H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. Safety data sheet available from the manufacturer.
Processing & tips
The surface must be firm, clean, dry and free of dust and grease; remove old grease and oil residues beforehand. Shake the can before use, fit the precision nozzle and spray from about 20 cm away. The spray works best when the moving parts are running during application. Contains solvent and is flammable: use only with good ventilation, away from ignition sources; wear safety goggles and solvent-resistant gloves (nitrile). Processing temperature +5 to +35 °C. Store cool and dry at +5 to +25 °C; unopened, the can keeps for 3 years.
Technical data
| Area of use: | Exterior, Interior |
|---|---|
| Base: | Solvent-based |
| Colour: | white-yellow |
| Content: | 400 ml |
| Pack size: | 400 ml spray can |
| Technical data | |
|---|---|
| Consistency: | liquid |
| Density: | approx. 0.82 g/ml |
| Viscosity: | 19,680 mPa·s (20 °C) |
| Temperature resistance: | -50 to +250 °C |
| Flash point: | 270 °C |
| VOC content: | 80 % |
| Weld load: | 2000 N (ASTM D2596) |
| Application | |
| Application temperature: | +5 to +35 °C |
| Storage: | cool and dry, +5 to +25 °C |
| Storage stability: | 3 years unopened |
| What's included | |
| Supplied as: | 400 ml spray can with precision nozzle |
Frequently asked questions
Is Soudal PTFE Spray silicone-free?
Yes. Soudal expressly states in the technical data sheet that the spray is silicone-free, so later painting and bonding work is not disturbed.
Up to what temperature is the lubricating film resistant?
The data sheet gives resistance to temperature changes from -50 to +250 °C. The can is used between +5 and +35 °C.
What is the spray intended for?
For machines, roller bearings, axles, gears, conveyor belts and sealing profiles made of metal and plastic that are exposed to high forces.
How long does the can last?
Unopened: 3 years, stored cool and dry at +5 to +25 °C.
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Soudal N.V.
Everdongenlaan 18-20
2300 Turnhout
Belgium
Electronic address verkauf@soudal.com
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.