Ottoseal S94 fire-rated silicone B1 310 ml
€11.79
- Not readily flammable to B1, for fire-retardant components
- Tested as paint-compatible, so neighbouring varnishes stay undamaged
- Non-corrosive and therefore safe on metal frames as well
- Survives weather, ageing and UV light
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Ottoseal S94 heat-resistant sealing compound for sealing on components that are subject to increased requirements for fire behaviour (e.g. fire-retardant components and fire-resistant glazing)
- Flame-retardant to DIN 4102-B1
- Paint-compatible to DIN 52452 (not paintable over)
- Non-corrosive
- Very good weather, ageing and UV resistance
- Tensile stress at 100% elongation (ISO 37, S3A): 0.4 N/mm²
Areas of application of heat-resistant sealing compound:
- Sealing on components that are subject to increased requirements for fire behaviour (e.g. fire-retardant components and fire-resistant glazing)
- Suitable for jointing on glass elements
Substrates:
The bonding surfaces must be clean, free of grease, dry and sound so that the high-temperature adhesive adheres. The bonding surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants and other substances that impair adhesion, must be removed. Cleaning non-porous substrates: clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous substrates: clean surfaces of loose particles mechanically, e.g. with a wire brush or a grinding disc
Application:
Application method: manual caulking gun, compressed-air gun or cordless gun
Application temperature:
+5°C to +40°C (ambient temperature)
+5ºC to +35ºC (bonding surface temperature)
The heat-resistant sealing compound must be completely cured before it is exposed to temperatures above + 50 °C. The high-temperature silicone is not a fire-protection silicone. For this we recommend OTTOSEAL S 94. Because of the many possible influences during processing and application, the applicator must always carry out a trial application. The specific use-by date can be found printed on the container and must be observed. We recommend storing our products in the unopened original containers dry (< 60 % RH) in a temperature range of + 15° C to + 25° C. If the products are stored and / or transported for longer periods (several weeks) at higher temperature/ humidity, a reduction in shelf life or a change in material properties cannot be ruled out.
Standards and tests:
- Tested to EN 15651 - Part 1: F EXT-INT CC 25 LM
- Tested to EN 15651 - Part 2: G CC 25 LM
- Tested to EN 15651 - Part 4: PW INT 12.5 E
- Tested to DIN 4102-B1 – flame-retardant between solid mineral building materials (TU Munich wood research)
- Tested to DIN 25415, Part 1 - very good decontaminability of the sealant surface (Federal Institute for Materials Research and Testing, Berlin)
- Suitable for applications according to IVD Technical Data Sheet No. 9+11+20+24+27+29+31+35
- Quality seal of the IVD - Industry Association of Sealants - tested by ift - Institute for Window Technology, Rosenheim
- Compliant with Regulation (EC) No 1907/2006 (REACH)
- LEED® v3 compliant Credit IEQ 4.1: adhesives and sealants
- DGNB classifications
- French VOC emission class A+
Storage:
12 months from the date of production in unopened packaging, stored cool (+5ºC and +25ºC) and dry. Close opened containers tightly and use up quickly.
Colour:
grey, black, transparent, white
Supplied as:
310ml cartridge
Technical data
| Material: | Silicone |
|---|
| Version | |
|---|---|
| Colour: | transparent |
| Technical data | |
| Product group: | High-temperature & fire protection silicone |
| Standards | |
| Standard: | DIN 4102 |
| Use | |
| Merchandise group: | Sealants |
| Application | |
| Application temperature: | +5 °C to +40 °C |
| What's included | |
| Supplied as: | 310 ml cartridge |
| Storage | |
| Storage: | 12 months from the production date in unopened packaging, stored cool (+5ºC and +25ºC) and dry |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project