Ottoseal S17 high-temperature silicone +285 °C 310 ml – case of 20

The case of 20 is the manufacturer’s original case containing 20 units of the same type. You pay less per unit than when buying singly, and the sealed case is delivered – ideal for trade businesses and larger projects.

Ottoseal S17 High-Temperature Silicone for heat-resistant yet stress-compensating bonding and sealing, e.g. on cast-section boilers, flue gas boxes, tiled stoves. Also suitable in the motor vehicle sector for applications in engines and gearboxes. Ottoseal S17 High-Temperature Silicone has a temperature resistance of up to + 285 °C.

• Neutral-curing 1K high-temperature silicone
• Exceptionally high temperature resistance of up to + 285 °C
• High bond strength
• Non-corrosive

Areas of application of High-Temperature Silicone:

• High-temperature silicone for heat-resistant yet stress-compensating bonding and sealing, e.g. on cast-section boilers, flue gas boxes, tiled stoves etc.
• Also suitable for vehicle applications in engines and gearboxes

Substrates:

The bonding surfaces must be clean, free of grease, dry and sound so that the high-temperature adhesive adheres. The bonding surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants and other substances that impair adhesion, must be removed. Cleaning non-porous substrates: clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous substrates: clean surfaces of loose particles mechanically, e.g. with a wire brush or a grinding disc

Application:

Application method: manual caulking gun, compressed-air gun or cordless gun
Application temperature:
+5°C to +40°C (ambient temperature)
+5ºC to +35ºC (bonding surface temperature)
The heat-resistant sealing compound must be completely cured before it is exposed to temperatures above + 50 °C. The high-temperature silicone is not a fire-protection silicone. For this we recommend OTTOSEAL S 94. Because of the many possible influences during processing and application, the applicator must always carry out a trial application. The specific use-by date can be found printed on the container and must be observed. We recommend storing our products in the unopened original containers dry (< 60 % RH) in a temperature range of + 15° C to + 25° C. If the products are stored and / or transported for longer periods (several weeks) at higher temperature/ humidity, a reduction in shelf life or a change in material properties cannot be ruled out.

Storage: 

12 months from the date of production in unopened packaging, stored cool (+5ºC and +25ºC) and dry . Close opened containers tightly and use up quickly.

Colour:

red-brown

Supplied as:

310ml cartridge