Ottoseal S105 sanitary silicone 310 ml
€7.29
- Fungicidal formulation, so the joint in the bathroom stays clean for longer
- Proven on tiles in the shower, kitchen and WC
- Available in seventeen shades to match the existing joint
- Elastic enough for expansion joints on floor and wall
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Ottoseal S105 Sanitary Silicone is an acetate-curing 1K silicone sealant. Ottoseal S105 Sanitary Silicone is characterised by weather resistance on tiles or prevents early mould growth in silicone joints in addition. The inexpensive Ottoseal S105 Sanitary Silicone is used for sealing expansion joints in the floor and wall area. The elastic Ottoseal S105 Sanitary Silicone is offered in 17 suitable shades for bathroom, WC, kitchen, washbasin.
- Fungicidally treated
- Resistance to mould attack
- Very good weather, ageing and UV resistance
- For long-lasting applications indoors and outdoors
Standards and tests:
- Tested to EN 15651 - Part 1: F EXT-INT CC 25 LM
- Tested to EN 15651 - Part 2: G CC 25 LM
- Tested to EN 15651 - Part 3: XS 1
- Suitable for applications in accordance with IVD leaflet no. 3-1+3-2+14+31+35
- Quality seal of the IVD - Industry Association of Sealants - tested by ift - Institute for Window Technology, Rosenheim
- Compliant with Regulation (EC) No 1907/2006 (REACH)
- Classification according to building certification systems: see sustainability data sheet
- French VOC emission class A+
- Declaration in Baubook Austria
- EMICODE® EC 1 Plus - very low emissions
- Tested fire behaviour to EN 13501: Class E
Areas of application:
- Expansion and connection joints in the floor and wall area
- Expansion and connection joints in sanitary areas
- Sealing channel glass (e.g. Profilit glazing)
Pre-treatment:
The bonding surfaces must be clean, free of grease, dry and sound. The bonding surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants and other substances that impair adhesion, must be removed. Cleaning non-porous substrates: clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous substrates: clean surfaces of loose particles mechanically, e.g. with a steel brush or a grinding disc.
Application:
Application temperature: +5ºC to +35ºC.
Application method: apply with a manual caulking gun, compressed-air gun or cordless gun.
Cleaning: with white spirit before curing, afterwards removable with silicone remover or mechanically.
Smoothing: with smoothing agent and scraper before a skin forms.
Special notes:
Before using the adhesive / sealant, the user must ensure that the materials in the contact area (solid, liquid and gaseous) are compatible with the adhesive / sealant and do not damage or alter it (e.g. discolour it). For materials that are subsequently processed in the area of the adhesive / sealant, the user must clarify beforehand that their ingredients or emissions cannot impair or alter the adhesive / sealant (e.g. discolouration). If necessary, the user must consult the respective manufacturer of the materials. During curing, small amounts of acetic acid are gradually released. Ensure good ventilation during application and curing. After curing, the product is completely odourless, physiologically harmless and inert. The curing time lengthens as the layer thickness of the silicone increases. One-component silicones are not suitable for full-surface bonding unless the special structural conditions for it are met. If the silicone sealant is to be used in layer thicknesses of more than 15 mm, please contact our application technology department beforehand. Avoid contact with materials containing bitumen or releasing plasticisers, e.g. butyl, EPDM, neoprene, insulating and black coatings.
Storage:
In closed containers, can be stored for at least 18 months cool and dry.
The specific use-by date can be found printed on the container and must be observed. We recommend storing Otto Chemie adhesives and sealants in the unopened original containers dry (< 60 % RH) in a temperature range of + 15° C to + 25° C. If the products are stored and/or transported for longer periods (several weeks) at higher temperature/humidity, a reduction in shelf life or a change in material properties cannot be ruled out.
Supplied as:
310 ml cartridge (20 cartridges per carton)
Colour:
| 310 ml cartridge | 400 ml aluminium foil bag | |
|---|---|---|
| S105-04-C62 | on request | |
| S105-04-C67 | on request | |
| S105-04-C10 | S105-07-C10 | |
| S105-04-C1105 | on request | |
| S105-04-C86 | S105-07-C86 | |
| S105-04-C05 | on request | |
| S105-04-C09 | on request | |
| S105-04-C72 | S105-07-C72 | |
| S105-04-C787 | S105-07-C787 | |
| S105-04-C71 | S105-07-C71 | |
| S105-04-C02 | S105-07-C02 | |
| S105-04-C776 | on request | |
| S105-04-C70 | S105-07-C70 | |
| S105-04-C1168 | on request | |
| S105-04-C501 | on request | |
| S105-04-C08 | S105-07-C08 | |
| S105-04-C656 | on request | |
| S105-04-C43 | S105-07-C43 | |
| S105-04-C15 | on request | |
| S105-04-C230 | S105-07-C230 | |
| S105-04-C84 | on request | |
| S105-04-C52 | on request | |
| S105-04-C2044 | on request | |
| S105-04-C18 | S105-07-C18 | |
| S105-04-C116 | on request | |
| S105-04-C04 | on request | |
| S105-04-C77 | S105-07-C77 | |
| S105-04-C94 | S105-07-C94 | |
| S105-04-C910 | on request | |
| S105-04-C79 | on request | |
| S105-04-C1106 | on request | |
| S105-04-C00 | S105-07-C00 | |
| S105-04-C01 | S105-07-C01 | |
| S105-04-C387 | on request | |
| S105-04-C706 | on request |
Technical data
| Material: | Silicone |
|---|
| Version | |
|---|---|
| Colour: | transparent |
| Technical data | |
| Product type: | Sanitary silicone |
| Use | |
| Merchandise group: | Sealants |
| What's included | |
| Supplied as: | 310 ml cartridge |
| Storage | |
| Storage: | Can be stored in closed packs, cool and dry, for at least 18 months |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project
These products go with it
Customers also bought
Content: 100 Metre (€0.15 / 1 Metre)
Content: 0,31 Litre (€15.45 / 1 Litre)
Content: 0,3 Litre (€29.83 / 1 Litre)