Skip to main content Skip to search Skip to main navigation

Birtel sieve sleeve for injection mortar 12x50mm M6/8

Description

Version 12x50mm M6/8 . The Birtel perforated sleeve (also called anchor sleeve) is an indispensable accessory for processing bonded anchor mortar in hollow-chamber and perforated blocks. Only the sleeve creates an optimal hold for the anchor rod or threaded rod to be set.

Your benefits

  • Optimum hold in perforated and hollow blocks
  • For processing composite mortar
  • Secure anchoring of threaded and anchor rods
  • Matching common thread sizes
  • Simple use with injection mortar

Areas of application

  • Installing anchor and threaded rods
  • Perforated and hollow blocks
  • In combination with VMU or SP300 composite mortar
  • Anchoring in masonry

Technical details and application

Drill the hole and clean it of drilling dust, insert the sieve sleeve and fill it completely with composite mortar. Then insert the threaded rod with a turning motion and do not load it until cured. Choose the sleeve size to match the thread and drilling depth. Observe the manufacturer's information on drill hole and curing.

Technical data

Area of use: Exterior, Interior
Version
Pack size: 12x50mm M6/8
Technical data
Product type: Composite mortar
Product group: Injection mortar & anchor adhesive
Use
Merchandise group: Adhesives

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Birtel KG
Noswendeler Str. 7a
66687 Wadern
Germany

Electronic address info@birtelkg.de
Phone: +49 6871 922440

Information as of: 2026-09-18

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


For your project

These products go with it

Project: Fix heavy loads with injection mortar

Drill the hole, blow it out thoroughly and brush it out. Then inject the mortar via the static mixer from the bottom of the hole and screw in the threaded rod; in perforated and hollow block brick insert a sieve sleeve first. Load only after the curing time.

  1. Apply

  2. Tools & accessories

3 items selected