BIWA gun foam B2 filling foam, pack
€76.19
- A reserve for larger building projects in one box
- A medium bulk density, economical and firm all the same
- Low in shrinkage, so filled voids stay to size
- Sandable and paintable once cured
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
This 1K polyurethane gun foam is used for filling and insulating joints, cavities and connections. The pack contains twelve cans of 750 ml each and is thus designed for continuous building-site work. The foam cures through atmospheric humidity and is processed with a foam gun.
Benefits
- Pack of 12 × 750 ml, designed for larger building projects
- Bulk density of around 24 kg/m³, good ratio of yield to strength
- Building material class B2 to DIN 4102
- Low shrinkage and dimensionally stable, fills cavities permanently
- Can be sanded and painted, therefore directly reworkable
Areas of application
- Filling joints, cavities and connections on walls and ceilings
- Thermal and sound insulation indoors and outdoors
- Floor connections, openings and cable and pipe penetrations
- Where individual cans would have to be bought again and again, the container is the calmer solution
Product details
The foam consists of 1-component polyurethane and is champagne-coloured. After about one hour it can be cut; when cured it withstands −40 °C to +90 °C. Application temperature +5 °C to +30 °C. Made in Belgium.
Shake the can vigorously and screw it upright into the gun. Dampen the substrate, then dispense evenly and fill joints only partially, as the foam expands afterwards. Cured foam is not UV-resistant and must be covered outdoors.
Technical data
| Area of use: | Exterior, Interior |
|---|---|
| Colour: | champagne |
| Material: | Polyurethane (PU) |
| Version | |
|---|---|
| Content: | 12 × 750 ml |
| Technical data | |
| Contents: | 9 l |
| Product type: | Gun foam |
| Bulk density: | approx. 24 kg/m³ |
| Standards | |
| Building material class: | B2 to DIN 4102 |
| Use | |
| Merchandise group: | Construction foam & PU foam |
| Application | |
| Application temperature: | +5 °C to +30 °C |
| Origin | |
| Country of manufacture: | Belgium |
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Birtel KG
Noswendeler Str. 7a
66687 Wadern
Germany
Electronic address
info@birtelkg.de
Phone: +49 6871 922440
Information as of: 2026-09-18
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project