Ottoseal S67 cleanroom and HVAC silicone neutral fungicidal 310 ml transparent
€12.95
- For cleanrooms, laboratories, operating theatres and food processing businesses
- Suitable for ventilation and air conditioning systems to VDI 6022 part 1
- Resistant to cleaning agents and disinfectants per the manufacturer
- Neutral-curing and low in odour, it does not attack unprotected metals
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
Ottoseal S67 is a cleanroom and HVAC silicone based on a neutral-curing 1K silicone (alkoxy system) for elastic joints in areas with high hygiene requirements. It has been tested for microbial resistance to DIN EN ISO 846, is suitable for ventilation systems according to VDI 6022 Part 1 and carries the EMICODE EC 1 Plus seal. The 310 ml cartridge in eight shades is aimed at jointing professionals and ventilation installers.
Benefits at a glance
- Hygienic: fungicidally treated and resistant to cleaning and disinfecting agents.
- Gentle on metals: neutral-curing and non-corrosive, adheres without primer to stainless steel and galvanised iron.
- Pleasant in the room: low odour during application, EMICODE EC 1 Plus and French VOC class A+.
- Permanently elastic: elongation at break approx. 700 %, temperature-resistant from -40 to +120 °C.
- For indoors and outdoors: very good weathering, ageing and UV resistance.
Areas of application
- Cleanrooms and production rooms, for example in chip and electronics manufacturing
- Production rooms for pharmaceuticals and medical devices
- Operating theatres, examination and laboratory rooms, hospitals
- Food-processing plants and cold storage areas
- Sealing ventilation and air-conditioning systems, such as kitchen extract air
Limits & notes
Not for natural stone such as marble or granite – a natural stone silicone is the right choice for that. Not for bonding over large areas; from 15 mm layer thickness ask the manufacturer's technical service. Avoid contact with bitumen, butyl, EPDM, neoprene or black coatings. In dark rooms without daylight, light shades can yellow. According to the data sheet, the declaration of no objection for the area close to food applies only to transparent, stainless steel and RAL 9010.
Labelling: The product is not classified under Regulation (EC) No 1272/2008; no signal word applies. EUH208 Contains trimethoxyvinylsilane, 3-(triethoxysilyl)propylamine, 2-octyl-2H-isothiazol-3-one. May produce an allergic reaction. EUH210 Safety data sheet available on request. Safety data sheet available from the manufacturer.
Application & tips
Bonding surfaces must be clean, free of grease, dry and sound. Clean non-porous surfaces with OTTO Cleaner T, porous ones with the steel brush. Apply at +5 to +35 °C with manual, compressed-air or cordless gun. Smooth before skin formation after approx. 10 minutes without pushing silicone layers over one another. Ensure good ventilation during application and curing and avoid skin contact. Store unopened and dry at +15 to +25 °C; according to the manufacturer a trial application is always necessary.
Frequently asked questions
Is Ottoseal S67 suitable for ventilation systems?
According to the manufacturer it is suitable for HVAC systems to VDI 6022 Part 1.
Can the silicone come into contact with food?
An ISEGA declaration of no objection exists only for transparent, stainless steel and RAL 9010.
Does the joint tolerate disinfectants?
Yes, details are given in the manufacturer's resistance list.
Do I need a primer?
Not on glass, ceramic and stainless steel. Concrete, plaster and aerated concrete need OTTO Primer 1215, powder-coated aluminium 1101 or 1216.
Can I use S67 on marble or granite?
No, the manufacturer excludes natural stone.
Technical data
| Area of use: | Exterior, Interior |
|---|---|
| Content: | 310 ml |
| Material: | Silicone |
| Pack size: | 310 ml cartridge |
| Version | |
|---|---|
| Colour: | transparent |
| Technical data | |
| Base: | 1K silicone, neutral-curing (alkoxy system), low in odour |
| Test: | DIN EN ISO 846 (ISEGA), suitable for HVAC systems to VDI 6022 part 1 |
| Emissions: | EMICODE EC 1 Plus, French VOC class A+ |
| Fire behaviour: | Class E to EN 13501 |
| Shore A hardness: | approx. 26 |
| Elongation at break: | approx. 700 % |
| Temperature resistance: | -40 to +120 °C |
| Application | |
| Skin formation time: | approx. 10 min (23 °C, 50 % RH) |
| Through-curing: | approx. 2–3 mm in 24 h (23 °C, 50 % r. F.) |
| Application temperature: | +5 to +35 °C |
| Use | |
| Field of use: | Indoors and outdoors |
| What's included | |
| Supplied as: | 310 ml cartridge, storable 12 months from manufacture (unopened, dry, +15 to +25 °C) |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project