Ottocoll P525 Turbo PU adhesive RAL 7012 2x190 ml
€15.95
- For corner joints on metal windows and conservatories
- Two-component and weather-resistant
- Also for load-bearing bonds in metal construction
- 14 days right of withdrawal
- Expert advice: 02831 9167703 Mon–Thu 9–16, Fri 9–12 (CET)
- Specialist dealer in Kevelaer, Lower Rhine
Description
The premium corner-joint adhesive OTTOCOLL® P 525 is a 2-component PU adhesive that is perfectly suited to weather-resistant bonding of corner joints on metal windows, doors and facades as well as conservatories. But this adhesive also handles various other bonds in metal construction and various force-locking bonds of a wide variety of materials such as wood, metal, plastic or stone without any problem. OTTOCOLL® P 525 is characterised by reliable through-curing without volume shrinkage and extreme tensile strength in the cured state.
- Available in six processing times from 1 to 45 minutes
- Fast curing even in high layer thicknesses - Fast further processing
- Reliable through-curing in a defined time - Plannable handling and functional strength
- Shrinkage-free curing - No volume shrinkage
- Tensile strength after 7 days — approx. 14,000 N (ift test certificate)
Areas of application Ottocoll P525:
- Weather-resistant bonding of corner joints on metal windows, doors and facades as well as conservatories
- General bonding in metal construction
- Also suitable for force-locking bonding of a wide variety of materials such as wood, metal, plastics, stone etc.
Standards and tests:
- Tensile strength tested at the Institute for Window Technology, Rosenheim
- Meets the requirements of DIN EN 204-D4 for weather-resistant bonding of wood and wood-based materials
- Meets the requirements of DIN EN 14257 (WATT 91) for heat-resistant bonding of wood and wood-based materials
- LEED® v3 compliant Credit IEQ 4.1: adhesives and sealants
- French VOC emission class A+
- Complies with the requirements for fire behaviour to EN 13501: class E
- Suitable for applications according to IVD Technical Data Sheet No. 30+35
Pre-treatment:
The bonding surfaces must be cleaned and any contamination, such as release agents, preservatives, grease, oil, dust, water, old adhesives / sealants and other substances that impair adhesion, must be removed. Cleaning non-porous substrates: clean with OTTO Cleaner T (flash-off time approx. 1 minute) and a clean, lint-free cloth. Cleaning porous substrates: clean surfaces of loose particles mechanically, e.g. with a steel brush or a grinding disc. The bonding surfaces must be clean, free of grease, dry and sound.
Application notes:
Processing 2K adhesives and sealants from side-by-side cartridge: First remove the stoppers of both components. Insert the cartridge into the gun. Squeeze out material until material emerges from both components. Wipe off material and attach the static mixer. Check the homogeneity of the mixture. Apply the adhesive and join the parts as soon as possible, at the latest within the processing time. Because of the many possible influences during processing and application, the applicator must always carry out a trial application. The specific use-by date can be found printed on the container and must be observed. We recommend storing our products in the unopened original containers dry (< 60 % RH) in a temperature range of + 15° C to + 25° C. If the products are stored and / or transported for longer periods (several weeks) at higher temperature/ humidity, a reduction in shelf life or a change in material properties cannot be ruled out. Safety goggles must be worn during application. Maximum working pressure 5 bar when processing with compressed-air guns.
Supplied as:
2 x 190 ml cartridge (10 cartridges per carton)
Colour:
dark brown
Technical data
| Colour: | RAL 9016 traffic white, cream white, dark brown |
|---|---|
| Pack size: | 2 × 310 ml dual cartridge |
| Technical data | |
|---|---|
| Contents: | 380 ml |
| Product group: | 2-component adhesive |
| Standards | |
| Standard: | DIN EN 204 |
| Use | |
| Merchandise group: | Adhesives |
| What's included | |
| Supplied as: | 2x 310 ml cartridge |
Data sheets
Data sheets and documents
All documents come unchanged from the manufacturer.
Manufacturer information
Manufacturer information pursuant to Art. 19 EU GPSR
Postal address
Hermann Otto GmbH
Krankenhausstr. 14
83413 Fridolfing
Germany
Electronic address info@otto-chemie.de
Information as of: 2026-09-17
Reviews
All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.
For your project