Otto StainEx natural stone degreasing paste 310 ml – case of 12

The case of 12 is the manufacturer’s original case containing 12 units of the same type. You pay less per unit than when buying singly, and the sealed case is delivered – ideal for trade businesses and larger projects.

Ottoseal StainEx Natural Stone Degreasing Paste for degreasing marble and natural stones on which edge-zone greasing has occurred due to unsuitable sealants.

• Ready-to-use natural stone degreasing paste
• Easy to apply
• If used successfully, costly and time-consuming refurbishment of natural stone floorings can be avoided

Application:

OTTOSEAL StainEx can remove edge-zone greasing on natural stone caused by unsuitable sealants and dissolves contamination up to 2cm deep. A preliminary test should be carried out to make sure that the greasing can be removed with OTTOSEAL StainEx. This paste is only effective on greasing; contamination of natural stone by primer, washing-up liquid etc. is not removed. The sealant must be removed completely from the joint. When using the paste, the joint flanks should be dry. Spread OTTOSEAL StainEx onto the surface to be cleaned and work it in with a brush. Then apply OTTOSEAL StainEx again to achieve an application thickness of min. 5mm. After the paste has dried (at least 12 hours, paste must be completely pulverised), sweep away or vacuum up the remaining solid with a broom. After cleaning, no dark stains may be visible any more. Remove deep-lying contamination with a second or third application. Then clean the joints and re-grout with the natural stone silicone OTTOSEAL S 70. Because of the many possible influences during processing and application, the applicator must always carry out a trial application. The specific use-by date can be found printed on the container and must be observed.

	Remove the sealant mechanically and completely from the joint.
	Apply OTTOSEAL StainEx to the surface to be cleaned.
	Work the paste into the surface to be cleaned with a brush. Then apply OTTOSEAL StainEx again.
	Using a spatula, spread the paste evenly, making sure an application thickness of min. 5 mm is achieved.
	After the paste has dried completely (approx. 12 hrs.), sweep or vacuum up the remaining solid with a broom.
	After cleaning, no dark stains may be visible any more. Remove deep-lying contamination with a second or third application.

Consumption:

1 cartridge for approx. 500 cm² at 5 mm layer thickness

Special notes:

Every natural stone is unique in its composition. For this reason it cannot be ruled out that a natural stone greasing may become worse even with proper use of the degreasing paste. Although this effect occurs only extremely rarely, it is mentioned here purely as a precaution. Because of the large number of different types of natural stone, a preliminary test on a concealed area is recommended. For these reasons no guarantee can be given. Do not use OTTOSEAL StainEx at substrate temperatures below +5°C and above +20°C.

Storage:

12 months. Store cool and dry. Do not expose to permanent direct sunlight

Supplied as:

310 ml aluminium cartridge