Skip to main content Skip to search Skip to main navigation

Birtel pure aluminium tape 19 mm x 50 m

Description

Size 19 mm. The Birtel aluminium adhesive tape is used for bonding aluminium-laminated mineral fibre insulation materials as well as for sealing pipes and ventilation ducts. The pure aluminium adhesive tape is classified as non-combustible according to DIN 4102 Part 1 and is equipped with a very strong, ageing-resistant polyacrylate adhesive.

Your benefits

  • Pure aluminium backing, non-combustible (A2/B1 to DIN 4102-1)
  • Very strongly adhesive, high-shear-strength polyacrylate adhesive
  • High ageing resistance, does not dry out
  • For insulating against heat and cold
  • Resistant during welding under shielding gas

Areas of application

  • Bonding aluminium-laminated mineral fibre insulation materials
  • Sealing pipes and ventilation ducts
  • Insulating against heat and cold
  • Sealing tanks and pipelines

Technical details and application

Length 50 m, different widths. The bonding surface must be clean, dry and free of grease and dust. Apply the tape evenly and press it down firmly with a pressure roller to achieve a tight connection. Observe the manufacturer's information on substrate and temperature.

Technical data

Area of use: Interior
Content: 50 m
Material: Aluminium
Pack size: 50 m roll
Size: 19 mm, 50 mm
Standards
Approval: DIN 4102
Use
Merchandise group: Tapes & films
Product type: Aluminium adhesive tape

Frequently asked questions

Is the tape really non-combustible?

Yes, it is classified in classes A2 and B1 to DIN 4102 Part 1. This means it is approved for technical insulation on heating and ventilation.

Which width do I need for ventilation ducts?

For seams and joints on ducts and for aluminium-faced insulation, the 50 mm roll is standard. The 19 mm roll is intended for connections, penetrations and repair spots.

What temperature does the tape withstand?

The continuous service range is -40 °C to +140 °C. The laminate withstands +180 °C for short periods.

Can I use the tape outdoors on the roof?

No, permanent weather-exposed waterproofing is not intended. For roofs and façades, butyl or bitumen tapes are the right choice.

Can I tear the tape off by hand?

No, the aluminium foil is cut to length with a utility knife or scissors. The cut edges are sharp, so wear cut-resistant gloves.

Manufacturer information

Manufacturer information pursuant to Art. 19 EU GPSR

Postal address Birtel KG
Noswendeler Str. 7a
66687 Wadern
Germany

Electronic address info@birtelkg.de
Phone: +49 6871 922440

Information as of: 2026-09-18

Reviews

0 of 0 reviews

Average rating of 0 out of 5 stars

All reviews come from buyers. Reviews can only be submitted via the personal, signed link we send to the order's e-mail address after delivery; the link is bound to the order and the purchased item, there is no form without a purchase. We check every review before publication and publish positive and negative reviews alike. Reviews from our former shop baustoffhandel-nrw.de were migrated; there, too, only customers who had bought the item could review it.


Customers also bought

Skip product gallery
Sparvar clear lacquer spray protective lacquer satin-gloss 400 ml
Gloss level: Silk gloss
Regular price: €5.95

Content: 0,4 Litre (€14.88 / 1 Litre)

Available, delivery time: 1-3 days

Sparvar hammer-finish effect spray silver metal look 400 ml
Regular price: €7.19

Content: 0,4 Litre (€17.98 / 1 Litre)

Available, delivery time: 1-3 days